9 open source boards using the SN74LVC2G17
Real designs built with the SN74LVC2G17, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Rosco m68k
rosco-m68k
160 × 100 mm74 partsBSD-3-Clause199Ossc pro
marqs85
212.5 × 99.5 mm492 parts2LCERN-OHL-P-2.031De2-vd
marqs85
77.5 × 63.3 mm67 parts2LGPL-3.014PCEHD
wifiber
118.2 × 73 mm161 parts2LNo license7Lpt breakout board
awpe
180.5 × 52.3 mm247 parts2LNo license2RP2040/RP2350
USB duck v3 POC
Freimor
30 × 47.5 mm78 parts4LMIT0RP2040/RP2350
USB duck v3
Freimor
30.8 × 50 mm77 parts4LMIT0GVH InteractiveCounter
daniel-bornhorst
317.5 × 25.4 mm49 parts2LNo license0RP2040/RP2350
USB duck v3 redraw
Freimor
30.8 × 50 mm77 parts4LMIT0
How designs wire the SN74LVC2G17
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the SN74LVC2G17 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 nF).
- The 2A pin has a series resistor on 3 of 7 designs, most often 330 Ω (then 680 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 86% | — |
| 2Apin 3 | Connected to: Signal 100% |
|
| VCCpin 5 | Connected to: 3.3V 71% · a signal 29% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rosco m68k by rosco-m68k, Ossc pro by marqs85, De2-vd by marqs85 and PCEHD by wifiber.
The SN74LVC2G17 in open source designs
The gallery holds 9 open source boards using the SN74LVC2G17 from 7 GitHub repositories; a typical one measures about 118.2 × 52.3 mm and carries around 77 components.
63% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Rosco m68k by rosco-m68k.
Microcontrollers on boards using the SN74LVC2G17
What boards using the SN74LVC2G17 are built for
SN74LVC2G17: common questions
Where can I find a SN74LVC2G17 reference design?
Each of the 9 boards on this page is a real design using the SN74LVC2G17. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC2G17 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 7 open source designs using the SN74LVC2G17.
What resistor goes on the SN74LVC2G17 2A pin?
The 2A pin has a series resistor on 3 of 7 designs, most often 330 Ω (then 680 Ω). Counted from the KiCad layouts of 7 open source designs using the SN74LVC2G17.
Which microcontrollers do boards using the SN74LVC2G17 use?
Most are built on RP2040/RP2350 (3).
How big is a typical board using the SN74LVC2G17?
The median is 118.2 × 52.3 mm, and 63% are two-layer designs.
What is the most popular open source board using the SN74LVC2G17?
By GitHub stars, Rosco m68k by rosco-m68k, with 199 stars.
Can I simulate one of these boards using the SN74LVC2G17 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.