4 open source boards using the SPX2920U-3.3_TO220

Real designs built with the SPX2920U-3.3_TO220, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The SPX2920U-3.3_TO220 in open source designs

The gallery holds 4 open source boards using the SPX2920U-3.3_TO220 from 3 GitHub repositories; a typical one measures about 99.1 × 99.1 mm and carries around 44 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is 6809v2 by jbevren.

Parts used alongside the SPX2920U-3.3_TO220

What boards using the SPX2920U-3.3_TO220 are built for

SPX2920U-3.3_TO220: common questions

Where can I find a SPX2920U-3.3_TO220 reference design?

Each of the 4 boards on this page is a real design using the SPX2920U-3.3_TO220. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the SPX2920U-3.3_TO220?

The median is 99.1 × 99.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the SPX2920U-3.3_TO220?

By GitHub stars, 6809v2 by jbevren, with 22 stars.

Can I simulate one of these boards using the SPX2920U-3.3_TO220 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part