5 open source boards using the SSP7615-33DFR
Real designs built with the SSP7615-33DFR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Osc dev v006
OpenServoCore
50 × 40 mm82 parts6LApache-2.034Nordic nRF
Fuimini-V2
Zipra1
15 × 29.2 mm59 parts4LCERN-OHL-S-2.03RP2040/RP2350
Wuard core v1
wuard
17.8 × 19.9 mm28 parts2LCERN-OHL-S-2.01Nordic nRF
Fuimini-V2-LSM6DSV
Zipra1
15 × 29.2 mm59 parts4LCERN-OHL-S-2.03STM32
Servo dev board
OpenServoCore
51.5 × 26.5 mm35 parts4LApache-2.034
The SSP7615-33DFR in open source designs
The gallery holds 5 open source boards using the SSP7615-33DFR from 3 GitHub repositories; a typical one measures about 17.8 × 29.2 mm and carries around 59 components.
80% use four copper layers or more, and 100% carry an open source license.
The most starred is Osc dev v006 by OpenServoCore.
Microcontrollers on boards using the SSP7615-33DFR
What boards using the SSP7615-33DFR are built for
SSP7615-33DFR: common questions
Where can I find a SSP7615-33DFR reference design?
Each of the 5 boards on this page is a real design using the SSP7615-33DFR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SSP7615-33DFR use?
Most are built on Nordic nRF (2), STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the SSP7615-33DFR?
The median is 17.8 × 29.2 mm, and 20% are two-layer designs.
What is the most popular open source board using the SSP7615-33DFR?
By GitHub stars, Osc dev v006 by OpenServoCore, with 34 stars.
Can I simulate one of these boards using the SSP7615-33DFR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.