8 open source boards using the STM32F030C8T6

Real designs built with the STM32F030C8T6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the STM32F030C8T6

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32F030C8T6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
  • The VDDA pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 nF).
  • The NRST pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ.
  • The NRST pin has a capacitor to GND on 4 of 6 designs, most often 100 nF.
VDDpin 1, 24, 48Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (26), 10 µF (5), 4.7 µF (3)
PC13pin 2Connected to: A connector 33% · not connected 17%
  • Series resistor on 50% · 1.5 kΩ (1), 887 Ω (1), 22 kΩ (1)
PC14pin 3Connected to: A connector 33% · not connected 17%
  • Series resistor on 50% · 1.5 kΩ (1), 887 Ω (1), 22 kΩ (1)
PC15pin 4Connected to: A connector 33% · not connected 17%
  • Capacitor to GND on 33% · 20 pF (1), 100 nF (1)
PF0pin 5Connected to: Signal 83% · not connected 17%
  • Crystal on 50% · 8 MHz (2), 25 MHz (1)
  • Capacitor to GND on 33% · 27 pF (1), 12 pF (1)
PF1pin 6Connected to: Signal 83% · not connected 17%
  • Crystal on 50% · 8 MHz (2), 25 MHz (1)
  • Capacitor to GND on 33% · 27 pF (1), 12 pF (1)
NRSTpin 7Connected to: A connector 50% · not connected 17%
  • Pull-up to 3.3V on 67% · 10 kΩ (4)
  • Capacitor to GND on 67% · 100 nF (4)
VSSApin 8Connected to: GND 100%
VDDApin 9Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (6), 10 nF (1), 1 µF (1)
PA0pin 10Connected to: A connector 33% · not connected 33%
  • Pull-up to 9V on 33% · 10 kΩ (2)
PA7pin 17Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 33 Ω (1), 100 Ω (1)
PB0pin 18Connected to: Not connected 50% · a signal 50%
  • Series resistor on 33% · 10 kΩ (1), 22 kΩ (1)
PB1pin 19Connected to: Signal 83% · not connected 17%
  • Series resistor on 50% · 10 kΩ (1), 100 Ω (1), 22 kΩ (1)
PB2pin 20Connected to: Signal 83% · not connected 17%
  • Series resistor on 50% · 10 kΩ (1), 100 Ω (1), 220 Ω (1)
PB10pin 21Connected to: A connector 33%
  • Series resistor on 50% · 10 kΩ (1), 1 kΩ (1), 220 Ω (1)
PB11pin 22Connected to: A connector 33% · not connected 17%
  • Series resistor on 33% · 10 kΩ (1), 220 Ω (1)
VSSpin 23, 47Connected to: GND 100%
PB12pin 25Connected to: A connector 33% · not connected 17%
  • Series resistor on 33% · 10 kΩ (1), 220 Ω (1)
PB13pin 26Connected to: A connector 33% · not connected 17%
  • Series resistor on 33% · 10 kΩ (1), 220 Ω (1)
PB14pin 27Connected to: A connector 33% · not connected 17%
  • Series resistor on 33% · 10 kΩ (1), 220 Ω (1)
PB15pin 28Connected to: Signal 67% · not connected 33%
  • Pull-up to 3.3V on 33% · 10 kΩ (2)
PA8pin 29Connected to: Signal 83% · not connected 17%
  • Pull-up to 3.3V on 33% · 10 kΩ (2)
PA9pin 30Connected to: A connector 33% · not connected 17%
  • Series resistor on 33% · 10 kΩ (1), 100 Ω (1)
PA10pin 31Connected to: A connector 33% · not connected 17%
  • Series resistor on 33% · 10 kΩ (1), 100 Ω (1)
PA11pin 32Connected to: Signal 67% · not connected 33%
  • Pull-up to 3.3V on 33% · 10 kΩ (2)
PA12pin 33Connected to: Signal 83% · not connected 17%
  • Series resistor on 50% · 100 Ω (2), 2.2 kΩ (1)
PF7pin 36Connected to: Signal 100%
  • Series resistor on 33% · 47 kΩ (1), 22 kΩ (1)
  • Pull-up to 3.3V on 33% · 3.3 kΩ (1), 4.7 kΩ (1)
PB3pin 39Connected to: Signal 83% · not connected 17%
  • Series resistor on 67% · 330 Ω (1), 10 kΩ (1), 33 Ω (1)
PB4pin 40Connected to: A connector 33% · not connected 17%
  • Series resistor on 50% · 33 Ω (6), 10 kΩ (1), 220 Ω (1)
PB5pin 41Connected to: A connector 33% · not connected 17%
  • Series resistor on 33% · 33 Ω (1), 220 Ω (1)
PB6pin 42Connected to: A connector 67%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (1), 10 kΩ (1)
PB7pin 43Connected to: A connector 67% · not connected 17%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (1), 10 kΩ (1)
BOOT0pin 44Connected to: Signal 83% · not connected 17%
  • Resistor to GND on 67% · 10 kΩ (2), 1 kΩ (1), 2 kΩ (1)
  • Series resistor on 33% · 560 Ω (1), 100 Ω (1)
PB8pin 45Connected to: A connector 33% · not connected 17%
  • Pull-up to 3.3V on 33% · 10 kΩ (1), 2.2 kΩ (1)
  • Series resistor on 33% · 1.5 kΩ (1), 220 Ω (1)
PB9pin 46Connected to: A connector 33% · not connected 17%
  • Pull-up to 3.3V on 33% · 10 kΩ (1), 2.2 kΩ (1)
  • Series resistor on 33% · 1.5 kΩ (1), 220 Ω (1)

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include XG Mobile Dock by osy, RSTM32F030C8T6 ProMiniPlus by r-pv, Anthracite PCB (Bottom) by trope-oshw and SmallDSP Maxi by Gemuesesaft.

The STM32F030C8T6 in open source designs

The gallery holds 8 open source boards using the STM32F030C8T6 from 6 GitHub repositories; a typical one measures about 110 × 77 mm and carries around 175 components.

75% use four copper layers or more, and 88% carry an open source license.

The most starred is XG Mobile Dock by osy.

Parts used alongside the STM32F030C8T6

Microcontrollers on boards using the STM32F030C8T6

What boards using the STM32F030C8T6 are built for

STM32F030C8T6: common questions

Where can I find a STM32F030C8T6 reference design?

Each of the 8 boards on this page is a real design using the STM32F030C8T6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F030C8T6 VDD pin?

The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the STM32F030C8T6.

What decoupling capacitors do designs use on the STM32F030C8T6 VDDA pin?

The VDDA pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 6 open source designs using the STM32F030C8T6.

What pull-up resistor is used on the STM32F030C8T6 NRST pin?

The NRST pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the STM32F030C8T6.

Which microcontrollers do boards using the STM32F030C8T6 use?

Most are built on STM32 (8).

How big is a typical board using the STM32F030C8T6?

The median is 110 × 77 mm, and 25% are two-layer designs.

What is the most popular open source board using the STM32F030C8T6?

By GitHub stars, XG Mobile Dock by osy, with 703 stars.

Can I simulate one of these boards using the STM32F030C8T6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part