6 open source boards using the STM32F100C8Tx
Real designs built with the STM32F100C8Tx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Blue usb midi
zacrogers
93.5 × 30 mm40 parts2LNo license8STM32
Sdisfp
cleverfox
169.7 × 75.2 mm147 parts2LNo license1STM32
Sdisfp
cleverfox
61 × 88.9 mm107 parts2LNo license0STM32
Vibration-Detector
adityarawat1223
60 × 56 mm31 parts2LNo license0STM32
Stm32f103-dev board
Rennaafi
33.7 × 25.4 mm28 parts2LNo license0STM32
Combo ports
cleverfox
169.7 × 64 mm127 parts2LNo license1
How designs wire the STM32F100C8Tx
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32F100C8Tx connects to, and the resistors, capacitors and other passives placed on it.
- The VDDA_9 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The VDD_24 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The VDD_36 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
- The VDD_48 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBAT_1pin 1 | Connected to: 3.3V 60% · not connected 40% |
|
| PC13_2pin 2 | Connected to: Not connected 60% · a signal 40% | — |
| PC15_4pin 4 | Connected to: Not connected 60% · a signal 40% | — |
| PD0_5pin 5 | Connected to: Signal 60% · not connected 40% |
|
| PD1_6pin 6 | Connected to: Signal 60% · not connected 40% |
|
| NRST_7pin 7 | Connected to: Signal 100% |
|
| VSSA_8pin 8 | Connected to: GND 100% | — |
| VDDA_9pin 9 | Connected to: 3.3V 60% · a signal 40% |
|
| PA0_10pin 10 | Connected to: Not connected 80% · a signal 20% | — |
| PA1_11pin 11 | Connected to: Not connected 60% · a signal 40% | — |
| PB0_18pin 18 | Connected to: Not connected 60% · a signal 40% | — |
| PB10_21pin 21 | Connected to: Signal 80% · not connected 20% |
|
| PB11_22pin 22 | Connected to: Signal 80% · not connected 20% |
|
| VSS_23pin 23 | Connected to: GND 100% | — |
| VDD_24pin 24 | Connected to: 3.3V 60% · a signal 40% |
|
| PB12_25pin 25 | Connected to: Not connected 60% · a signal 40% | — |
| PB13_26pin 26 | Connected to: Not connected 60% · a signal 40% | — |
| PA8_29pin 29 | Connected to: Not connected 80% · a signal 20% | — |
| PA9_30pin 30 | Connected to: Not connected 60% · a signal 40% | — |
| PA10_31pin 31 | Connected to: Not connected 60% · a signal 40% | — |
| PA11_32pin 32 | Connected to: Signal 60% · not connected 40% |
|
| PA12_33pin 33 | Connected to: Signal 60% · not connected 40% |
|
| VSS_35pin 35 | Connected to: GND 100% | — |
| VDD_36pin 36 | Connected to: 3.3V 60% · a signal 40% |
|
| PA15_38pin 38 | Connected to: Not connected 100% | — |
| PB3_39pin 39 | Connected to: Not connected 100% | — |
| PB4_40pin 40 | Connected to: Not connected 100% | — |
| PB5_41pin 41 | Connected to: Not connected 100% | — |
| BOOT0_44pin 44 | Connected to: Signal 100% |
|
| PB8_45pin 45 | Connected to: Not connected 100% | — |
| PB9_46pin 46 | Connected to: Not connected 100% | — |
| VSS_47pin 47 | Connected to: GND 100% | — |
| VDD_48pin 48 | Connected to: 3.3V 60% · a signal 40% |
|
15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Blue usb midi by zacrogers, Combo ports by cleverfox, Vibration-Detector by adityarawat1223 and Sdisfp by cleverfox.
The STM32F100C8Tx in open source designs
The gallery holds 6 open source boards using the STM32F100C8Tx from 5 GitHub repositories; a typical one measures about 77.2 × 60 mm and carries around 74 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Blue usb midi by zacrogers.
Microcontrollers on boards using the STM32F100C8Tx
What boards using the STM32F100C8Tx are built for
STM32F100C8Tx: common questions
Where can I find a STM32F100C8Tx reference design?
Each of the 6 boards on this page is a real design using the STM32F100C8Tx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32F100C8Tx VDDA_9 pin?
The VDDA_9 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F100C8Tx.
What decoupling capacitors do designs use on the STM32F100C8Tx VDD_24 pin?
The VDD_24 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F100C8Tx.
What decoupling capacitors do designs use on the STM32F100C8Tx VDD_36 pin?
The VDD_36 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the STM32F100C8Tx.
What parts are used alongside the STM32F100C8Tx?
The LMH0303, LMH0344 and MP2307 appear in the most repositories here.
Which microcontrollers do boards using the STM32F100C8Tx use?
Most are built on STM32 (6).
How big is a typical board using the STM32F100C8Tx?
The median is 77.2 × 60 mm, and 100% are two-layer designs.
What is the most popular open source board using the STM32F100C8Tx?
By GitHub stars, Blue usb midi by zacrogers, with 8 stars.
Can I simulate one of these boards using the STM32F100C8Tx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.