8 open source boards using the STM32F411RET6

Real designs built with the STM32F411RET6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the STM32F411RET6

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32F411RET6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VBAT pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
  • The VDDA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
  • The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 47 µF).
  • The VCAP1 pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 4.7 µF).
VBATpin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (7), 1 µF (1)
PC14pin 3Connected to: Signal 83% · not connected 17%
  • Crystal on 33% · 32.768 kHz (2)
  • Capacitor to GND on 33% · 10 pF (1), 6 pF (1)
PC15pin 4Connected to: Signal 67% · not connected 33%
  • Crystal on 33% · 32.768 kHz (2)
  • Capacitor to GND on 33% · 10 pF (1), 6 pF (1)
PH0pin 5Connected to: Signal 83% · not connected 17%
  • Capacitor to GND on 83% · 12 pF (2), 10 pF (1), 6 pF (1)
  • Crystal on 83% · 16 MHz (2), 12 MHz (1)
PH1pin 6Connected to: Signal 83% · not connected 17%
  • Capacitor to GND on 50% · 12 pF (1), 6 pF (1)
  • Crystal on 50% · 16 MHz (1)
  • Series resistor on 33% · 0 Ω (1), 220 Ω (1)
NRSTpin 7Connected to: A connector 50%
  • Capacitor to GND on 83% · 100 nF (5)
  • Pull-up to 3.3V on 50% · 10 kΩ (1), 100 kΩ (1)
PC0pin 8Connected to: Not connected 67% · a signal 33%
VSSApin 12Connected to: GND 100%
VDDApin 13Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (7), 1 µF (2), 10 µF (1)
PA1pin 15Connected to: Signal 83% · not connected 17%
  • Series resistor on 33% · 1 kΩ (1), 33 Ω (1)
PA3pin 17Connected to: Not connected 67% · a signal 33%
VSSpin 18, 31, 47, 63Connected to: GND 100%
VDDpin 19, 32, 48, 64Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (25), 47 µF (1), 4.7 µF (1)
VCAP1pin 30Connected to: Signal 83% · VCORE 17%
  • Capacitor to GND on 100% · 10 µF (2), 4.7 µF (2), 100 nF (1)
PB12pin 33Connected to: Not connected 50% · a signal 50%
  • Series resistor on 33% · 51 Ω (1), 33 Ω (1)
PB13pin 34Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 51 Ω (1), 33 Ω (1)
PB15pin 36Connected to: Signal 83% · not connected 17%
  • Series resistor on 33% · 51 Ω (1), 33 Ω (1)
PC9pin 40Connected to: Not connected 50% · a signal 50%
  • Pull-up to 3.3V on 33% · 3.3 kΩ (1)
PA8pin 41Connected to: Signal 83% · not connected 17%
  • Pull-up to 3.3V on 50% · 10 kΩ (1), 3.3 kΩ (1)
PA15pin 50Connected to: Not connected 67% · a signal 33%
  • Series resistor on 33% · 51 Ω (1), 33 Ω (1)
PC11pin 52Connected to: Not connected 50% · a signal 50%
  • Series resistor on 33% · 10 kΩ (1), 33 Ω (1)
PD2pin 54Connected to: Not connected 50% · a signal 50%
  • Series resistor on 33% · 10 kΩ (1), 33 Ω (1)
PB7pin 59Connected to: A connector 33% · not connected 33%
  • Pull-up to 3.3V on 33% · 10 kΩ (1), 220 Ω (1)
BOOT0pin 60Connected to: Signal 100%
  • Resistor to GND on 83% · 10 kΩ (2), 1 kΩ (1), 100 kΩ (1)
PB9pin 62Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 51 Ω (1), 1 kΩ (1)

33 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include STM32XP by MechatronixLab, Echo Ayla80 by phpbbireland, Tide clock by weberel and STM32-Walkie-Talkie by ANSHUMANDOCX.

The STM32F411RET6 in open source designs

The gallery holds 8 open source boards using the STM32F411RET6 from 6 GitHub repositories; a typical one measures about 63.6 × 47 mm and carries around 62 components.

63% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is STM32XP by MechatronixLab.

Microcontrollers on boards using the STM32F411RET6

STM32F411RET6: common questions

Where can I find a STM32F411RET6 reference design?

Each of the 8 boards on this page is a real design using the STM32F411RET6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F411RET6 VBAT pin?

The VBAT pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32F411RET6.

What decoupling capacitors do designs use on the STM32F411RET6 VDDA pin?

The VDDA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32F411RET6.

What decoupling capacitors do designs use on the STM32F411RET6 VDD pin?

The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 6 open source designs using the STM32F411RET6.

Which microcontrollers do boards using the STM32F411RET6 use?

Most are built on STM32 (6) and RP2040/RP2350 (2).

How big is a typical board using the STM32F411RET6?

The median is 63.6 × 47 mm, and 63% are two-layer designs.

What is the most popular open source board using the STM32F411RET6?

By GitHub stars, STM32XP by MechatronixLab, with 14 stars.

Can I simulate one of these boards using the STM32F411RET6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part