2 open source boards using the STM32H750IBK6

Real designs built with the STM32H750IBK6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The STM32H750IBK6 in open source designs

The gallery holds 2 open source boards using the STM32H750IBK6 from 2 GitHub repositories; a typical one measures about 43 × 46.2 mm and carries around 148 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Teresina-Rack by marcoallegretti.

Parts used alongside the STM32H750IBK6

Microcontrollers on boards using the STM32H750IBK6

What boards using the STM32H750IBK6 are built for

STM32H750IBK6: common questions

Where can I find a STM32H750IBK6 reference design?

Each of the 2 boards on this page is a real design using the STM32H750IBK6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the STM32H750IBK6?

The IS25LP064A-JBLE, PCM3060PWR, TPS62170DSGR and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the STM32H750IBK6 use?

Most are built on STM32 (2).

How big is a typical board using the STM32H750IBK6?

The median is 43 × 46.2 mm, and 0% are two-layer designs.

What is the most popular open source board using the STM32H750IBK6?

By GitHub stars, Teresina-Rack by marcoallegretti, with 0 stars.

Can I simulate one of these boards using the STM32H750IBK6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part