5 open source boards using the STSPIN250
Real designs built with the STSPIN250, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Oresat adcs card
oresat
99.8 × 94.6 mm579 parts4LGPL-2.021ESP32
RoboDojo
Amoskeag
60 × 60 mm63 parts4LBSD-2-Clause6NXP
ADCS-Camera-Payload-Board
NortheasternSatelliteLab
88 × 94.5 mm194 parts4LNo license2Raspberry Pi
Xmera-ADCS
pleiades-cluster
87.6 × 90 mm97 parts4LNo license0OreSat Mag Card
oresat
99.8 × 94.6 mm175 parts4LGPL-2.021
The STSPIN250 in open source designs
The gallery holds 5 open source boards using the STSPIN250 from 4 GitHub repositories; a typical one measures about 88 × 94.5 mm and carries around 175 components.
100% use four copper layers or more, and 60% carry an open source license.
The most starred is Oresat adcs card by oresat.
Parts used alongside the STSPIN250
Microcontrollers on boards using the STSPIN250
What boards using the STSPIN250 are built for
STSPIN250: common questions
Where can I find a STSPIN250 reference design?
Each of the 5 boards on this page is a real design using the STSPIN250. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STSPIN250 use?
Most are built on ESP32 (1), NXP (1), Raspberry Pi (1) and STM32 (1).
How big is a typical board using the STSPIN250?
The median is 88 × 94.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the STSPIN250?
By GitHub stars, Oresat adcs card by oresat, with 21 stars.
Can I simulate one of these boards using the STSPIN250 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.