10 open source boards using the TC1262-33
Real designs built with the TC1262-33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
McuOpenPnP Machine
ErichStyger
3.5 × 2.5 mm55 parts2LNo license69ESP32C3 Watch
k-ying
42 × 42 mm53 parts2LNo license23STM32
Link
oats-center
88.9 × 76.2 mm121 parts4LNo license3Pms5003
ayoy
65 × 64 mm32 parts2LNo license2STM32
Airsticks
lizboyer
48.7 × 22.6 mm16 parts2LNo license1STM32
Klyr f072
dialgorithm
65 × 30 mm31 parts2LNo license0Pokus
cernohorsky
100 × 80 mm141 parts2LNo license9- schematic only · 197 partsSTM32
DegraderDosimeter
ButiTando
197 parts4LNo license0 ESP32
SPD PowerMonitor
LedgerProject
47.5 × 37 mm31 parts4LMIT0Motherboard
oats-center
108 × 88.9 mm47 parts4LNo license3
How designs wire the TC1262-33
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TC1262-33 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 6 of 8 designs, most often 1 µF (then 100 nF).
- The VO pin has a decoupling capacitor on 5 of 8 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIpin 1 | Connected to: 5V 88% |
|
| GNDpin 2 | Connected to: GND 88% | — |
| VOpin 3 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include McuOpenPnP Machine by ErichStyger, ESP32C3 Watch by k-ying, Pokus by cernohorsky and Link by oats-center.
The TC1262-33 in open source designs
The gallery holds 10 open source boards using the TC1262-33 from 9 GitHub repositories; a typical one measures about 65 × 42 mm and carries around 50 components.
60% are two-layer designs, the rest use four layers or more, and 10% carry an open source license.
The most starred is McuOpenPnP Machine by ErichStyger.
What boards using the TC1262-33 are built for
TC1262-33: common questions
Where can I find a TC1262-33 reference design?
Each of the 10 boards on this page is a real design using the TC1262-33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TC1262-33 VI pin?
The VI pin has a decoupling capacitor on 6 of 8 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the TC1262-33.
What decoupling capacitors do designs use on the TC1262-33 VO pin?
The VO pin has a decoupling capacitor on 5 of 8 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the TC1262-33.
Which microcontrollers do boards using the TC1262-33 use?
Most are built on STM32 (4), ESP32 (1) and NXP (1).
How big is a typical board using the TC1262-33?
The median is 65 × 42 mm, and 60% are two-layer designs.
What is the most popular open source board using the TC1262-33?
By GitHub stars, McuOpenPnP Machine by ErichStyger, with 69 stars.
Can I simulate one of these boards using the TC1262-33 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.