5 open source boards using the TCA6416APWR
Real designs built with the TCA6416APWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Clock
Matir
196.7 × 31.5 mm90 parts2LBSD-2-Clause18STM32
Heart
lime7git
47.6 × 45.2 mm56 parts4LNo license2ESP32
DIYBMS ESP32 Controller
orgTestCodacy11KRepos110MB
122.5 × 87.6 mm78 parts2LCC-BY-NC-4.00ESP32
DIYBMS ESP32 Controller
Arkariusz
122.5 × 87.6 mm75 parts2LCC-BY-NC-4.00ESP32
DIYBMS ESP32 Controller
stuartpittaway
122.5 × 87.6 mm90 parts2LCC-BY-NC-4.01.1k
How designs wire the TCA6416APWR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TCA6416APWR connects to, and the resistors, capacitors and other passives placed on it.
- The RESET pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
- The P14 pin has a series resistor on 5 of 5 designs, most often 22 kΩ (then 390 Ω).
- The P16 pin has a series resistor on 5 of 5 designs, most often 22 kΩ (then 390 Ω).
- The P17 pin has a series resistor on 5 of 5 designs, most often 22 kΩ (then 390 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INTpin 1 | Connected to: The microcontroller 60% · not connected 40% |
|
| VCCIpin 2 | Connected to: 3.3V 100% |
|
| RESETpin 3 | Connected to: The microcontroller 60% |
|
| P0pin 4 | Connected to: A connector 60% |
|
| P1pin 5 | Connected to: A connector 60% |
|
| P2pin 6 | Connected to: A connector 60% |
|
| P3pin 7 | Connected to: A connector 60% |
|
| P4pin 8 | Connected to: Signal 80% · not connected 20% |
|
| P5pin 9 | Connected to: Signal 80% · not connected 20% |
|
| P6pin 10 | Connected to: Signal 80% · not connected 20% |
|
| P7pin 11 | Connected to: Signal 80% · not connected 20% |
|
| GNDpin 12 | Connected to: GND 100% | — |
| P10pin 13 | Connected to: Signal 80% · not connected 20% |
|
| P11pin 14 | Connected to: Signal 80% · not connected 20% |
|
| P12pin 15 | Connected to: Signal 80% · not connected 20% |
|
| P13pin 16 | Connected to: Signal 80% · not connected 20% |
|
| P14pin 17 | Connected to: Signal 100% |
|
| P15pin 18 | Connected to: Not connected 60% · a signal 40% |
|
| P16pin 19 | Connected to: Signal 100% |
|
| P17pin 20 | Connected to: A connector 60% |
|
| ADDRpin 21 | Connected to: AMS1117-3.3 60%, the microcontroller 60%, SN65HVD1050D 40% · GND 40% |
|
| SCLpin 22 | Connected to: The microcontroller 80% |
|
| SDApin 23 | Connected to: The microcontroller 80% |
|
| VCCPpin 24 | Connected to: AMS1117-3.3 60%, the microcontroller 60%, SN65HVD1050D 40% · 5V 40% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DIYBMS ESP32 Controller by stuartpittaway, Clock by Matir, Heart by lime7git and DIYBMS ESP32 Controller by Arkariusz.
The TCA6416APWR in open source designs
The gallery holds 5 open source boards using the TCA6416APWR from 5 GitHub repositories; a typical one measures about 122.5 × 87.6 mm and carries around 78 components.
80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is DIYBMS ESP32 Controller by stuartpittaway.
Parts used alongside the TCA6416APWR
What boards using the TCA6416APWR are built for
TCA6416APWR: common questions
Where can I find a TCA6416APWR reference design?
Each of the 5 boards on this page is a real design using the TCA6416APWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the TCA6416APWR RESET pin?
The RESET pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the TCA6416APWR.
What resistor goes on the TCA6416APWR P14 pin?
The P14 pin has a series resistor on 5 of 5 designs, most often 22 kΩ (then 390 Ω). Counted from the KiCad layouts of 5 open source designs using the TCA6416APWR.
What resistor goes on the TCA6416APWR P16 pin?
The P16 pin has a series resistor on 5 of 5 designs, most often 22 kΩ (then 390 Ω). Counted from the KiCad layouts of 5 open source designs using the TCA6416APWR.
What parts are used alongside the TCA6416APWR?
The AMS1117-3.3, ESP32-DEVKITC-32D, SN65HVD75DR, EL3H7(B)(TA)-G and SN65HVD1050D appear in the most repositories here.
Which microcontrollers do boards using the TCA6416APWR use?
Most are built on ESP32 (4) and STM32 (1).
How big is a typical board using the TCA6416APWR?
The median is 122.5 × 87.6 mm, and 80% are two-layer designs.
What is the most popular open source board using the TCA6416APWR?
By GitHub stars, DIYBMS ESP32 Controller by stuartpittaway, with 1,143 stars.
Can I simulate one of these boards using the TCA6416APWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.