9 open source boards using the SN65HVD1050D

Real designs built with the SN65HVD1050D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the SN65HVD1050D

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the SN65HVD1050D connects to, and the resistors, capacitors and other passives placed on it.

  • The VREF pin is left unconnected on 6 of 7 designs.
  • The VCC pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 22 µF).
  • The CANH pin has a series resistor on 4 of 7 designs, most often 120 Ω.
GNDpin 2Connected to: GND 100%
VCCpin 3Connected to: 5V 57% · a signal 43%
  • Decoupling capacitor on 57% · 100 nF (4), 22 µF (4), 220 nF (1)
VREFpin 5Connected to: Not connected 86%
CANHpin 7Connected to: A connector 71%
  • Series resistor on 57% · 120 Ω (3)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DIYBMS ESP32 Controller by stuartpittaway, Airsuspension controller by mumme74, AsmTest by honzakutil and Ctrl by M-o-a-T.

The SN65HVD1050D in open source designs

The gallery holds 9 open source boards using the SN65HVD1050D from 8 GitHub repositories; a typical one measures about 109.2 × 81.1 mm and carries around 78 components.

89% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.

The most starred is DIYBMS ESP32 Controller by stuartpittaway.

Microcontrollers on boards using the SN65HVD1050D

What boards using the SN65HVD1050D are built for

SN65HVD1050D: common questions

Where can I find a SN65HVD1050D reference design?

Each of the 9 boards on this page is a real design using the SN65HVD1050D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SN65HVD1050D VREF pin connected?

The VREF pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the SN65HVD1050D.

What decoupling capacitors do designs use on the SN65HVD1050D VCC pin?

The VCC pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 7 open source designs using the SN65HVD1050D.

What resistor goes on the SN65HVD1050D CANH pin?

The CANH pin has a series resistor on 4 of 7 designs, most often 120 Ω. Counted from the KiCad layouts of 7 open source designs using the SN65HVD1050D.

What parts are used alongside the SN65HVD1050D?

The SN65HVD75DR, AMS1117-3.3, ESP32-DEVKITC-32D, TCA6416APWR and TXS0102DCU appear in the most repositories here.

Which microcontrollers do boards using the SN65HVD1050D use?

Most are built on STM32 (3), ESP32 (2), RP2040/RP2350 (2) and AVR/Arduino (1).

How big is a typical board using the SN65HVD1050D?

The median is 109.2 × 81.1 mm, and 89% are two-layer designs.

What is the most popular open source board using the SN65HVD1050D?

By GitHub stars, DIYBMS ESP32 Controller by stuartpittaway, with 1,143 stars.

Can I simulate one of these boards using the SN65HVD1050D before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part