7 open source boards using the TEA1-0505

Real designs built with the TEA1-0505, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the TEA1-0505

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TEA1-0505 connects to, and the resistors, capacitors and other passives placed on it.

  • The -VIN pin is tied to GND on 6 of 7 designs.
  • The +VIN pin has a decoupling capacitor on 3 of 7 designs, most often 100 nF (then 1 µF).
-VINpin 1Connected to: GND 86%
+VINpin 2Connected to: 5V 86%
  • Decoupling capacitor on 43% · 100 nF (2), 1 µF (1), 10 nF (1)
+VOUTpin 4Connected to: 5V 71% · a signal 29%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kame32 by JavierIH, Biodata by QuinnFreedman, Hcv by chrkir and Universal interface adapter by 411568.

The TEA1-0505 in open source designs

The gallery holds 7 open source boards using the TEA1-0505 from 7 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 53 components.

57% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.

The most starred is Kame32 by JavierIH.

Parts used alongside the TEA1-0505

Microcontrollers on boards using the TEA1-0505

TEA1-0505: common questions

Where can I find a TEA1-0505 reference design?

Each of the 7 boards on this page is a real design using the TEA1-0505. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TEA1-0505 -VIN pin connected?

The -VIN pin is tied to GND on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TEA1-0505.

What decoupling capacitors do designs use on the TEA1-0505 +VIN pin?

The +VIN pin has a decoupling capacitor on 3 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the TEA1-0505.

Which microcontrollers do boards using the TEA1-0505 use?

Most are built on ESP32 (3), AVR/Arduino (2) and STM32 (2).

How big is a typical board using the TEA1-0505?

The median is 100 × 80 mm, and 57% are two-layer designs.

What is the most popular open source board using the TEA1-0505?

By GitHub stars, Kame32 by JavierIH, with 131 stars.

Can I simulate one of these boards using the TEA1-0505 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part