10 open source boards using the TFP410PAP
Real designs built with the TFP410PAP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Time-Sleuth
citrus3000psi
72 × 43 mm52 parts2LMIT90ESP32
Endeavour2
petrmikheev
100 × 85 mm263 parts6LGPL-3.049FPGA
Gecko5education
logisim-evolution
60.6 × 100 mm308 parts6LMIT18STM32
Eez bb3plus cm5-mcu
eez-open
55 × 40 mm134 parts6LTAPR-OHL-1.015RhapsodiePi
theBrutzler
85.2 × 56.1 mm261 parts6LNo license4Raspberry Pi
Motherboard
mikegoelzer
152.4 × 76.2 mm151 parts4LCustom license0ESP32
Endeavour2 upd
petrmikheev
100 × 85 mm238 parts6LGPL-3.049RhapsodiePi Routing V1
theBrutzler
85.2 × 56.1 mm261 parts6LNo license4Hdmi
KOEGlike
52 × 34.5 mm46 parts2LGPL-3.06Hdmi
hackclub
52 × 34.5 mm46 parts2LGPL-3.05
How designs wire the TFP410PAP
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TFP410PAP connects to, and the resistors, capacitors and other passives placed on it.
- The DVDD pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 nF).
- The DVDD_12 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 nF).
- The PVDD pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 nF).
- The TVDD_29 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DVDDpin 1 | Connected to: 3.3V 63% · a signal 38% |
|
| VREFpin 3 | Connected to: 3.3V 75% · a signal 25% | — |
| EDGE/HTPLGpin 9 | Connected to: Signal 88% |
|
| PDpin 10 | Connected to: GND 63% · a signal 25% | — |
| MSEN/PO1pin 11 | Connected to: Not connected 75% · a signal 25% | — |
| DVDD_12pin 12 | Connected to: 3.3V 63% · a signal 38% |
|
| BSEL/SCLpin 15 | Connected to: Signal 50% · not connected 38% |
|
| DGNDpin 16 | Connected to: GND 100% | — |
| PGNDpin 17 | Connected to: GND 100% | — |
| PVDDpin 18 | Connected to: 3.3V 50% · a signal 50% |
|
| TFADJpin 19 | Connected to: Signal 88% |
|
| TGNDpin 20 | Connected to: GND 100% | — |
| TVDDpin 23 | Connected to: 3.3V 50% · a signal 50% |
|
| TGND_26pin 26 | Connected to: GND 100% | — |
| TVDD_29pin 29 | Connected to: 3.3V 50% · a signal 50% |
|
| TGND_32pin 32 | Connected to: GND 100% | — |
| DVDD_33pin 33 | Connected to: 3.3V 63% · a signal 38% |
|
| RESERVEDpin 34 | Connected to: GND 88% | — |
| DKENpin 35 | Connected to: GND 63% · a signal 25% | — |
| DGND_48pin 48 | Connected to: GND 100% | — |
| NCpin 49 | Connected to: Not connected 88% | — |
| IDCK-pin 56 | Connected to: GND 75% | — |
| DGND_64pin 64 | Connected to: GND 100% | — |
| EP_65pin 65 | Connected to: GND 100% | — |
41 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Time-Sleuth by citrus3000psi, Endeavour2 by petrmikheev, Gecko5education by logisim-evolution and Eez bb3plus cm5-mcu by eez-open.
The TFP410PAP in open source designs
The gallery holds 10 open source boards using the TFP410PAP from 8 GitHub repositories; a typical one measures about 78.6 × 56.1 mm and carries around 195 components.
70% use four copper layers or more, and 70% carry an open source license.
The most starred is Time-Sleuth by citrus3000psi.
Parts used alongside the TFP410PAP
Microcontrollers on boards using the TFP410PAP
What boards using the TFP410PAP are built for
TFP410PAP: common questions
Where can I find a TFP410PAP reference design?
Each of the 10 boards on this page is a real design using the TFP410PAP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TFP410PAP DVDD pin?
The DVDD pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 8 open source designs using the TFP410PAP.
What decoupling capacitors do designs use on the TFP410PAP DVDD_12 pin?
The DVDD_12 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 8 open source designs using the TFP410PAP.
What decoupling capacitors do designs use on the TFP410PAP PVDD pin?
The PVDD pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 8 open source designs using the TFP410PAP.
What parts are used alongside the TFP410PAP?
The BT817Q-T, MT25QLxxxxxx1xSE and UCL0524P appear in the most repositories here.
Which microcontrollers do boards using the TFP410PAP use?
Most are built on ESP32 (2), FPGA (2), Raspberry Pi (1) and STM32 (1).
How big is a typical board using the TFP410PAP?
The median is 78.6 × 56.1 mm, and 30% are two-layer designs.
What is the most popular open source board using the TFP410PAP?
By GitHub stars, Time-Sleuth by citrus3000psi, with 90 stars.
Can I simulate one of these boards using the TFP410PAP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.