4 open source boards using the UCL0524P
Real designs built with the UCL0524P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Icepi sbc
cheyao
85 × 56 mm265 parts4LSHL-2.1342FPGA
M.2-FPGA-Accelerator
KaiPereira
22 × 80 mm276 parts6LNo license25Hdmi
KOEGlike
52 × 34.5 mm46 parts2LGPL-3.06Hdmi
hackclub
52 × 34.5 mm46 parts2LGPL-3.05
The UCL0524P in open source designs
The gallery holds 4 open source boards using the UCL0524P from 4 GitHub repositories; a typical one measures about 52 × 45.3 mm and carries around 156 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Icepi sbc by cheyao.
Parts used alongside the UCL0524P
Microcontrollers on boards using the UCL0524P
What boards using the UCL0524P are built for
UCL0524P: common questions
Where can I find a UCL0524P reference design?
Each of the 4 boards on this page is a real design using the UCL0524P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the UCL0524P?
The BT817Q-T, MT25QLxxxxxx1xSE, TFP410PAP and TPD2EUSB30 appear in the most repositories here.
Which microcontrollers do boards using the UCL0524P use?
Most are built on FPGA (1).
How big is a typical board using the UCL0524P?
The median is 52 × 45.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the UCL0524P?
By GitHub stars, Icepi sbc by cheyao, with 342 stars.
Can I simulate one of these boards using the UCL0524P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.