6 open source boards using the TLV333IDCKR

Real designs built with the TLV333IDCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The TLV333IDCKR in open source designs

The gallery holds 6 open source boards using the TLV333IDCKR from 4 GitHub repositories; a typical one measures about 24 × 30.3 mm and carries around 58 components.

67% use four copper layers or more, and 83% carry an open source license.

The most starred is IoT WA - AIO by RWTH-EBC.

Parts used alongside the TLV333IDCKR

Microcontrollers on boards using the TLV333IDCKR

TLV333IDCKR: common questions

Where can I find a TLV333IDCKR reference design?

Each of the 6 boards on this page is a real design using the TLV333IDCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TLV333IDCKR use?

Most are built on ESP32 (3), PIC (1) and RP2040/RP2350 (1).

How big is a typical board using the TLV333IDCKR?

The median is 24 × 30.3 mm, and 33% are two-layer designs.

What is the most popular open source board using the TLV333IDCKR?

By GitHub stars, IoT WA - AIO by RWTH-EBC, with 3 stars.

Can I simulate one of these boards using the TLV333IDCKR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part