7 open source boards using the TLV75512PDBVR

Real designs built with the TLV75512PDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the TLV75512PDBVR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TLV75512PDBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The IN_1 pin is tied to 3.3V on 5 of 5 designs.
  • The NC_4 pin is left unconnected on 5 of 5 designs.
  • The OUT_5 pin is tied to 1.2V on 4 of 5 designs.
  • The EN_3 pin is tied to 3.3V on 3 of 5 designs.
IN_1pin 1Connected to: 3.3V 100%
GND_2pin 2Connected to: GND 100%
EN_3pin 3Connected to: 3.3V 60% · GND 20% · a signal 20%
NC_4pin 4Connected to: Not connected 100%
OUT_5pin 5Connected to: 1.2V 80% · a signal 20%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Jetson-AI-Cam-CopperPilot by CopperPilot, T1s by hwkim3330, Agilex3 control card by johonkanen and MainBoard by meawoppl.

The TLV75512PDBVR in open source designs

The gallery holds 7 open source boards using the TLV75512PDBVR from 5 GitHub repositories; a typical one measures about 58.4 × 45 mm and carries around 98 components.

86% use four copper layers or more, and 29% carry an open source license.

The most starred is Jetson-AI-Cam-CopperPilot by CopperPilot.

Parts used alongside the TLV75512PDBVR

Microcontrollers on boards using the TLV75512PDBVR

What boards using the TLV75512PDBVR are built for

TLV75512PDBVR: common questions

Where can I find a TLV75512PDBVR reference design?

Each of the 7 boards on this page is a real design using the TLV75512PDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLV75512PDBVR IN_1 pin connected?

The IN_1 pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TLV75512PDBVR.

How is the TLV75512PDBVR NC_4 pin connected?

The NC_4 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TLV75512PDBVR.

How is the TLV75512PDBVR OUT_5 pin connected?

The OUT_5 pin is tied to 1.2V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TLV75512PDBVR.

Which microcontrollers do boards using the TLV75512PDBVR use?

Most are built on ESP32 (2) and STM32 (2).

How big is a typical board using the TLV75512PDBVR?

The median is 58.4 × 45 mm, and 14% are two-layer designs.

What is the most popular open source board using the TLV75512PDBVR?

By GitHub stars, Jetson-AI-Cam-CopperPilot by CopperPilot, with 9 stars.

Can I simulate one of these boards using the TLV75512PDBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part