5 open source boards using the TLV76701DRVx
Real designs built with the TLV76701DRVx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Sitina 1 Sensor Board
CameraNexus
71.5 × 63.6 mm415 parts6LMIT73Tuxkeychain
electron271
50 × 60 mm45 parts6LCC-BY-SA-4.017FPGA
Sitina 1 Sensor Board
novvoo
71.5 × 63.6 mm415 parts6LMIT2Analog bms
Stanislus29
121.1 × 78 mm59 parts4LMIT0TLV767 LDO
macnamtran
16.9 × 6.9 mm10 parts2LNo license0
How designs wire the TLV76701DRVx
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TLV76701DRVx connects to, and the resistors, capacitors and other passives placed on it.
- The FB pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 150 kΩ).
- The EN pin is tied to 16V on 5 of 5 designs.
- The IN pin is tied to 16V on 5 of 5 designs.
- The FB pin has a pull-up to VAB on 4 of 5 designs, most often 180 kΩ (then 470 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: VAB 80% · a signal 20% | — |
| FBpin 2 | Connected to: Signal 100% |
|
| GNDpin 3, 5 | Connected to: GND 100% | — |
| ENpin 4 | Connected to: 16V 100% | — |
| INpin 6 | Connected to: 16V 100% | — |
| PADpin 7 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sitina 1 Sensor Board by CameraNexus, Tuxkeychain by electron271, Sitina 1 Sensor Board by novvoo and TLV767 LDO by macnamtran.
The TLV76701DRVx in open source designs
The gallery holds 5 open source boards using the TLV76701DRVx from 5 GitHub repositories; a typical one measures about 71.5 × 63.6 mm and carries around 59 components.
80% use four copper layers or more, and 80% carry an open source license.
The most starred is Sitina 1 Sensor Board by CameraNexus.
Parts used alongside the TLV76701DRVx
Microcontrollers on boards using the TLV76701DRVx
What boards using the TLV76701DRVx are built for
TLV76701DRVx: common questions
Where can I find a TLV76701DRVx reference design?
Each of the 5 boards on this page is a real design using the TLV76701DRVx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TLV76701DRVx FB pin?
The FB pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 150 kΩ). Counted from the KiCad layouts of 5 open source designs using the TLV76701DRVx.
How is the TLV76701DRVx EN pin connected?
The EN pin is tied to 16V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TLV76701DRVx.
How is the TLV76701DRVx IN pin connected?
The IN pin is tied to 16V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TLV76701DRVx.
What parts are used alongside the TLV76701DRVx?
The 74HC2G17GW, AD9990, ADA4800, DG412DQ and DS1843D appear in the most repositories here.
Which microcontrollers do boards using the TLV76701DRVx use?
Most are built on FPGA (2).
How big is a typical board using the TLV76701DRVx?
The median is 71.5 × 63.6 mm, and 20% are two-layer designs.
What is the most popular open source board using the TLV76701DRVx?
By GitHub stars, Sitina 1 Sensor Board by CameraNexus, with 73 stars.
Can I simulate one of these boards using the TLV76701DRVx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.