6 open source boards using the TMC2208_SILENTSTEPSTICK
Real designs built with the TMC2208_SILENTSTEPSTICK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Sand-Plotter
tim-callinan
68.6 × 53.3 mm15 parts2LNo license2Microchip SAM
Urumbu USB Stepper Motor
SeanP2001
54.3 × 35.2 mm12 parts2LMIT1ESP32
Automatic-Screw-Feeder-Dispenser
Hennerz-07
120.1 × 64 mm31 parts2LNo license0ESP32
Kicad tugas akhir
nanangcreacoll
120 × 100 mm31 parts2LNo license0ESP32
MainBoard-PAMI-2025
LesKaribous
80 × 80 mm61 parts2LMIT1ESP32
Esp stepper
oguzhanbaser
76.8 × 95 mm39 parts2LNo license0
How designs wire the TMC2208_SILENTSTEPSTICK
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TMC2208_SILENTSTEPSTICK connects to, and the resistors, capacitors and other passives placed on it.
- The CLK pin is left unconnected on 5 of 5 designs.
- The PDN/UART1 pin is left unconnected on 5 of 6 designs.
- The PDN/UART2 pin is left unconnected on 4 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CLKpin JP1_3 | Connected to: Not connected 100% | — |
| PDN/UART1pin JP1_4 | Connected to: Not connected 83% · a signal 17% | — |
| PDN/UART2pin JP1_5 | Connected to: Not connected 67% · 3.3V 17% · a signal 17% | — |
| VMpin JP2_1 | Connected to: 12V 83% · a signal 17% | — |
| GNDpin JP2_2, JP2_8 | Connected to: GND 92% | — |
| VIOpin JP2_7 | Connected to: 5V 100% | — |
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sand-Plotter by tim-callinan, MainBoard-PAMI-2025 by LesKaribous, Urumbu USB Stepper Motor by SeanP2001 and Automatic-Screw-Feeder-Dispenser by Hennerz-07.
The TMC2208_SILENTSTEPSTICK in open source designs
The gallery holds 6 open source boards using the TMC2208_SILENTSTEPSTICK from 6 GitHub repositories; a typical one measures about 78.4 × 72 mm and carries around 31 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Sand-Plotter by tim-callinan.
Microcontrollers on boards using the TMC2208_SILENTSTEPSTICK
What boards using the TMC2208_SILENTSTEPSTICK are built for
TMC2208_SILENTSTEPSTICK: common questions
Where can I find a TMC2208_SILENTSTEPSTICK reference design?
Each of the 6 boards on this page is a real design using the TMC2208_SILENTSTEPSTICK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TMC2208_SILENTSTEPSTICK CLK pin connected?
The CLK pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 6 open source designs using the TMC2208_SILENTSTEPSTICK.
How is the TMC2208_SILENTSTEPSTICK PDN/UART1 pin connected?
The PDN/UART1 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TMC2208_SILENTSTEPSTICK.
How is the TMC2208_SILENTSTEPSTICK PDN/UART2 pin connected?
The PDN/UART2 pin is left unconnected on 4 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TMC2208_SILENTSTEPSTICK.
Which microcontrollers do boards using the TMC2208_SILENTSTEPSTICK use?
Most are built on ESP32 (4), AVR/Arduino (1) and Microchip SAM (1).
How big is a typical board using the TMC2208_SILENTSTEPSTICK?
The median is 78.4 × 72 mm, and 100% are two-layer designs.
What is the most popular open source board using the TMC2208_SILENTSTEPSTICK?
By GitHub stars, Sand-Plotter by tim-callinan, with 2 stars.
Can I simulate one of these boards using the TMC2208_SILENTSTEPSTICK before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.