6 open source boards using the TMP1075DGK
Real designs built with the TMP1075DGK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Sitina 1 Sensor Board
CameraNexus
71.5 × 63.6 mm415 parts6LMIT73FPGA
Sitina 1 Sensor Board
novvoo
71.5 × 63.6 mm415 parts6LMIT2STM32
RJX-Embedded-Training-Kit
MUDAL
69.7 × 70.9 mm103 parts2LGPL-3.00Realop1 powerdis bak1
Space-and-Satellite-Systems-UC-Davis
90 × 90 mm95 parts4LNo license0BesteLampe! LED Module D
lenaschimmel
21.1 × 59.9 mm49 parts4LNo license18RoomSensor 001 HMI
jirihusak
62.7 × 63.7 mm6 parts2LGPL-3.04
How designs wire the TMP1075DGK
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TMP1075DGK connects to, and the resistors, capacitors and other passives placed on it.
- The A2 pin is tied to GND on 6 of 6 designs.
- The V+ pin has a decoupling capacitor on 5 of 6 designs, most often 1 µF (then 100 nF).
- The A1 pin is tied to GND on 5 of 6 designs.
- The A0 pin is tied to GND on 5 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ALERTpin 3 | Connected to: Not connected 67% · GND 17% · a signal 17% | — |
| GNDpin 4 | Connected to: GND 100% | — |
| A2pin 5 | Connected to: GND 100% | — |
| A1pin 6 | Connected to: GND 83% · 4V 17% | — |
| A0pin 7 | Connected to: GND 83% · 4V 17% | — |
| V+pin 8 | Connected to: 3.3V 83% · a signal 17% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sitina 1 Sensor Board by CameraNexus, BesteLampe! LED Module D by lenaschimmel, RoomSensor 001 HMI by jirihusak and Sitina 1 Sensor Board by novvoo.
The TMP1075DGK in open source designs
The gallery holds 6 open source boards using the TMP1075DGK from 6 GitHub repositories; a typical one measures about 70.6 × 63.6 mm and carries around 99 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is Sitina 1 Sensor Board by CameraNexus.
Parts used alongside the TMP1075DGK
What boards using the TMP1075DGK are built for
TMP1075DGK: common questions
Where can I find a TMP1075DGK reference design?
Each of the 6 boards on this page is a real design using the TMP1075DGK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TMP1075DGK A2 pin connected?
The A2 pin is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TMP1075DGK.
What decoupling capacitors do designs use on the TMP1075DGK V+ pin?
The V+ pin has a decoupling capacitor on 5 of 6 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the TMP1075DGK.
How is the TMP1075DGK A1 pin connected?
The A1 pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TMP1075DGK.
What parts are used alongside the TMP1075DGK?
The 74HC2G17GW, AD9990, ADA4800, DG412DQ and DS1843D appear in the most repositories here.
Which microcontrollers do boards using the TMP1075DGK use?
Most are built on FPGA (2) and STM32 (1).
How big is a typical board using the TMP1075DGK?
The median is 70.6 × 63.6 mm, and 33% are two-layer designs.
What is the most popular open source board using the TMP1075DGK?
By GitHub stars, Sitina 1 Sensor Board by CameraNexus, with 73 stars.
Can I simulate one of these boards using the TMP1075DGK before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.