9 open source boards using the TMUX1511RSVR

Real designs built with the TMUX1511RSVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the TMUX1511RSVR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TMUX1511RSVR connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD_16 pin has a capacitor to GND on 4 of 4 designs, most often 1 µF (then 100 nF).
  • The N.C._7 pin is left unconnected on 3 of 5 designs (GND on 2).
  • The N.C._12 pin is left unconnected on 3 of 4 designs.
  • The SEL1_1 pin has a capacitor to GND on 2 of 5 designs, most often 1 µF (then 100 nF).
SEL1_1pin 1Connected to: Signal 80% · 1.8V 20%
  • Capacitor to GND on 40% · 1 µF (4), 100 nF (1)
N.C._7pin 7Connected to: Not connected 60% · GND 40%
GND_8pin 8Connected to: GND 80% · a signal 20%
SEL3_11pin 11Connected to: Signal 75% · 1.8V 25%
  • Capacitor to GND on 50% · 1 µF (4), 100 nF (1)
N.C._12pin 12Connected to: Not connected 75% · GND 25%
VDD_16pin 16Connected to: VDDA 50% · a signal 50%
  • Capacitor to GND on 100% · 1 µF (4), 100 nF (3), 4.7 µF (2)

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sidewalk Devkit by hlord2000, Pangotag PCB LCSC compat by andrewo3, Compact tablet by CopperPilot and CM4IOv5 by mindhashnl.

The TMUX1511RSVR in open source designs

The gallery holds 9 open source boards using the TMUX1511RSVR from 5 GitHub repositories; a typical one measures about 31.9 × 34 mm and carries around 91 components.

100% use four copper layers or more, and 33% carry an open source license.

The most starred is Sidewalk Devkit by hlord2000.

Microcontrollers on boards using the TMUX1511RSVR

TMUX1511RSVR: common questions

Where can I find a TMUX1511RSVR reference design?

Each of the 9 boards on this page is a real design using the TMUX1511RSVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TMUX1511RSVR VDD_16 pin connected?

The VDD_16 pin has a capacitor to GND on 4 of 4 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the TMUX1511RSVR.

How is the TMUX1511RSVR N.C._7 pin connected?

The N.C._7 pin is left unconnected on 3 of 5 designs (GND on 2). Counted from the KiCad layouts of 5 open source designs using the TMUX1511RSVR.

How is the TMUX1511RSVR N.C._12 pin connected?

The N.C._12 pin is left unconnected on 3 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the TMUX1511RSVR.

Which microcontrollers do boards using the TMUX1511RSVR use?

Most are built on STM32 (4), Raspberry Pi (2), Nordic nRF (1) and PIC (1).

How big is a typical board using the TMUX1511RSVR?

The median is 31.9 × 34 mm, and 0% are two-layer designs.

What is the most popular open source board using the TMUX1511RSVR?

By GitHub stars, Sidewalk Devkit by hlord2000, with 1 stars.

Can I simulate one of these boards using the TMUX1511RSVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part