5 open source boards using the TPA6110A2DGN

Real designs built with the TPA6110A2DGN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TPA6110A2DGN

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPA6110A2DGN connects to, and the resistors, capacitors and other passives placed on it.

  • The BYPASS pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 470 nF).
  • The IN2- pin has a series resistor on 5 of 5 designs, most often 33 kΩ (then 22 kΩ).
  • The VO2 pin has a series capacitor on 5 of 5 designs, most often 100 µF (then 220 µF).
  • The VO2 pin has a series resistor on 5 of 5 designs, most often 33 kΩ (then 5.6 kΩ).
BYPASSpin 1Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (2), 470 nF (1), 100 nF (1)
GNDpin 2, 9Connected to: GND 100%
SHDNpin 3Connected to: GND 80% · a signal 20%
IN2-pin 4Connected to: Signal 100%
  • Series resistor on 100% · 33 kΩ (3), 22 kΩ (3), 360 Ω (1)
VO2pin 5Connected to: Signal 100%
  • Series capacitor on 100% · 100 µF (2), 220 µF (2), 10 µF (1)
  • Series resistor on 100% · 33 kΩ (3), 5.6 kΩ (1), 40 kΩ (1)
VDDpin 6Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 100 nF (2)
VO1pin 7Connected to: Signal 100%
  • Series resistor on 100% · 33 kΩ (3), 5.6 kΩ (1), 40 kΩ (1)
  • Series capacitor on 100% · 100 µF (2), 220 µF (2), 10 µF (1)
IN1-pin 8Connected to: Signal 100%
  • Series resistor on 100% · 33 kΩ (3), 22 kΩ (3), 360 Ω (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gk pcbv3 by jncronin, Seed3-DevKit-Desktop by daisyaudio, VAMP by syntonos and Syntheis and aeffects module by connormichalec.

The TPA6110A2DGN in open source designs

The gallery holds 5 open source boards using the TPA6110A2DGN from 5 GitHub repositories; a typical one measures about 121 × 111 mm and carries around 125 components.

60% use four copper layers or more, and 20% carry an open source license.

The most starred is Gk pcbv3 by jncronin.

Parts used alongside the TPA6110A2DGN

Microcontrollers on boards using the TPA6110A2DGN

What boards using the TPA6110A2DGN are built for

TPA6110A2DGN: common questions

Where can I find a TPA6110A2DGN reference design?

Each of the 5 boards on this page is a real design using the TPA6110A2DGN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPA6110A2DGN BYPASS pin connected?

The BYPASS pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 470 nF). Counted from the KiCad layouts of 5 open source designs using the TPA6110A2DGN.

What resistor goes on the TPA6110A2DGN IN2- pin?

The IN2- pin has a series resistor on 5 of 5 designs, most often 33 kΩ (then 22 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPA6110A2DGN.

How is the TPA6110A2DGN VO2 pin connected?

The VO2 pin has a series capacitor on 5 of 5 designs, most often 100 µF (then 220 µF). Counted from the KiCad layouts of 5 open source designs using the TPA6110A2DGN.

Which microcontrollers do boards using the TPA6110A2DGN use?

Most are built on STM32 (3).

How big is a typical board using the TPA6110A2DGN?

The median is 121 × 111 mm, and 40% are two-layer designs.

What is the most popular open source board using the TPA6110A2DGN?

By GitHub stars, Gk pcbv3 by jncronin, with 78 stars.

Can I simulate one of these boards using the TPA6110A2DGN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part