3 open source boards using the TPS3823A-33DBVR

Real designs built with the TPS3823A-33DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The TPS3823A-33DBVR in open source designs

The gallery holds 3 open source boards using the TPS3823A-33DBVR from 2 GitHub repositories; a typical one measures about 152 × 122.5 mm and carries around 265 components.

100% use four copper layers or more, and 67% carry an open source license.

The most starred is Shack Relay Matrix rev C: shack interface by PE1RGU.

Microcontrollers on boards using the TPS3823A-33DBVR

What boards using the TPS3823A-33DBVR are built for

TPS3823A-33DBVR: common questions

Where can I find a TPS3823A-33DBVR reference design?

Each of the 3 boards on this page is a real design using the TPS3823A-33DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPS3823A-33DBVR use?

Most are built on ESP32 (2) and STM32 (1).

How big is a typical board using the TPS3823A-33DBVR?

The median is 152 × 122.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS3823A-33DBVR?

By GitHub stars, Shack Relay Matrix rev C: shack interface by PE1RGU, with 2 stars.

Can I simulate one of these boards using the TPS3823A-33DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part