3 open source boards using the TPS54060DGQ

Real designs built with the TPS54060DGQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The TPS54060DGQ in open source designs

The gallery holds 3 open source boards using the TPS54060DGQ from 2 GitHub repositories; a typical one measures about 139 × 70 mm and carries around 191 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is EEZ DIB MCU r1B2 by eez-open.

Microcontrollers on boards using the TPS54060DGQ

What boards using the TPS54060DGQ are built for

TPS54060DGQ: common questions

Where can I find a TPS54060DGQ reference design?

Each of the 3 boards on this page is a real design using the TPS54060DGQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TPS54060DGQ?

The DAC8552IDGKR, MC78L05, MC79L05, REF5025AIDR and SN74LVC1G3157DCKR appear in the most repositories here.

Which microcontrollers do boards using the TPS54060DGQ use?

Most are built on STM32 (3).

How big is a typical board using the TPS54060DGQ?

The median is 139 × 70 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS54060DGQ?

By GitHub stars, EEZ DIB MCU r1B2 by eez-open, with 394 stars.

Can I simulate one of these boards using the TPS54060DGQ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part