5 open source boards using the MC78L05

Real designs built with the MC78L05, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The MC78L05 in open source designs

The gallery holds 5 open source boards using the MC78L05 from 3 GitHub repositories; a typical one measures about 139 × 103.5 mm and carries around 190 components.

67% use four copper layers or more, and 60% carry an open source license.

The most starred is EEZ DIB MCU r1B2 by eez-open.

Microcontrollers on boards using the MC78L05

MC78L05: common questions

Where can I find a MC78L05 reference design?

Each of the 5 boards on this page is a real design using the MC78L05. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the MC78L05?

The DAC8552IDGKR, MC79L05, REF5025AIDR, SN74LVC1G3157DCKR and TL072D appear in the most repositories here.

Which microcontrollers do boards using the MC78L05 use?

Most are built on STM32 (3) and RP2040/RP2350 (1).

How big is a typical board using the MC78L05?

The median is 139 × 103.5 mm, and 33% are two-layer designs.

What is the most popular open source board using the MC78L05?

By GitHub stars, EEZ DIB MCU r1B2 by eez-open, with 394 stars.

Can I simulate one of these boards using the MC78L05 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part