5 open source boards using the REF5025AIDR

Real designs built with the REF5025AIDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The REF5025AIDR in open source designs

The gallery holds 5 open source boards using the REF5025AIDR from 4 GitHub repositories; a typical one measures about 139 × 95.3 mm and carries around 191 components.

67% use four copper layers or more, and 80% carry an open source license.

The most starred is EEZ DIB MCU r1B2 by eez-open.

Microcontrollers on boards using the REF5025AIDR

What boards using the REF5025AIDR are built for

REF5025AIDR: common questions

Where can I find a REF5025AIDR reference design?

Each of the 5 boards on this page is a real design using the REF5025AIDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the REF5025AIDR?

The DAC8552IDGKR, M24C32-WMN6P, MC78L05, MC79L05 and SN74LVC1G3157DCKR appear in the most repositories here.

Which microcontrollers do boards using the REF5025AIDR use?

Most are built on STM32 (3).

How big is a typical board using the REF5025AIDR?

The median is 139 × 95.3 mm, and 33% are two-layer designs.

What is the most popular open source board using the REF5025AIDR?

By GitHub stars, EEZ DIB MCU r1B2 by eez-open, with 394 stars.

Can I simulate one of these boards using the REF5025AIDR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part