5 open source boards using the TPS54531DDAR

Real designs built with the TPS54531DDAR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TPS54531DDAR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS54531DDAR connects to, and the resistors, capacitors and other passives placed on it.

  • The BOOT pin has a series capacitor on 5 of 5 designs, most often 100 nF.
  • The VIN pin has a capacitor to GND on 5 of 5 designs, most often 4.7 µF (then 10 nF).
  • The SS pin has a capacitor to GND on 5 of 5 designs, most often 10 nF (then 8.2 nF).
  • The PH pin has a series capacitor on 5 of 5 designs, most often 100 nF.
BOOTpin 1Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (4)
VINpin 2Connected to: Signal 60% · 12V 40%
  • Capacitor to GND on 100% · 4.7 µF (5), 10 nF (3), 10 µF (2)
ENpin 3Connected to: Signal 100%
  • Resistor to GND on 60% · 130 kΩ (2), 10 kΩ (1)
  • Pull-up to 12V on 40% · 665 kΩ (1), 10 kΩ (1)
SSpin 4Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 nF (3), 8.2 nF (1)
VSENSEpin 5Connected to: Signal 100%
  • Resistor to GND on 80% · 1.96 kΩ (3), 10 kΩ (1)
  • Series resistor on 80% · 10.2 kΩ (2), 10 kΩ (1), 14 kΩ (1)
COMPpin 6Connected to: Signal 100%
  • Series capacitor on 80% · 2.2 nF (3)
  • Capacitor to GND on 80% · 22 pF (2), 100 nF (1), 10 pF (1)
  • Series resistor on 40% · 10 kΩ (1), 31.6 kΩ (1)
GNDpin 7Connected to: GND 100%
PHpin 8Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (4)
  • Inductor on 100% · 4.7 µH (2)
POWERPADpin 9Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TRNXSDR-carrier by acruxcz, Adam psu by AkBKukU, BedCooler by NicholasKorth and Power Supply by adsehgal.

The TPS54531DDAR in open source designs

The gallery holds 5 open source boards using the TPS54531DDAR from 5 GitHub repositories; a typical one measures about 91.8 × 60.8 mm and carries around 94 components.

60% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is TRNXSDR-carrier by acruxcz.

Microcontrollers on boards using the TPS54531DDAR

What boards using the TPS54531DDAR are built for

TPS54531DDAR: common questions

Where can I find a TPS54531DDAR reference design?

Each of the 5 boards on this page is a real design using the TPS54531DDAR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS54531DDAR BOOT pin connected?

The BOOT pin has a series capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TPS54531DDAR.

How is the TPS54531DDAR VIN pin connected?

The VIN pin has a capacitor to GND on 5 of 5 designs, most often 4.7 µF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the TPS54531DDAR.

How is the TPS54531DDAR SS pin connected?

The SS pin has a capacitor to GND on 5 of 5 designs, most often 10 nF (then 8.2 nF). Counted from the KiCad layouts of 5 open source designs using the TPS54531DDAR.

Which microcontrollers do boards using the TPS54531DDAR use?

Most are built on STM32 (3) and AVR/Arduino (1).

How big is a typical board using the TPS54531DDAR?

The median is 91.8 × 60.8 mm, and 60% are two-layer designs.

What is the most popular open source board using the TPS54531DDAR?

By GitHub stars, TRNXSDR-carrier by acruxcz, with 15 stars.

Can I simulate one of these boards using the TPS54531DDAR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part