6 open source boards using the TPS72325DBVT
Real designs built with the TPS72325DBVT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RatEEG
tharaka27
70.5 × 33.7 mm73 parts2LMIT11PCBs
jwmke
45.5 × 52 mm72 parts4LNo license6STM32
8-Channel-Wireless-EEG
unaldevelopment
81.5 × 54.9 mm132 parts2LMIT3STM32
Final handsEMG
blakep7
85.9 × 94.4 mm200 parts4LNo license1EEG-I-LAB
Tahacrpc
101.6 × 53.3 mm139 parts4LCERN-OHL-1.21V2
jwmke
45.5 × 52 mm64 parts4LNo license6
How designs wire the TPS72325DBVT
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS72325DBVT connects to, and the resistors, capacitors and other passives placed on it.
- The NR pin has a capacitor to GND on 5 of 5 designs, most often 10 nF.
- The OUT pin has a capacitor to GND on 5 of 5 designs, most often 10 µF (then 2.2 µF).
- The OUT pin has a inductor on 3 of 5 designs, most often 3.3 µH.
- The IN pin is tied to -5V on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| INpin 2 | Connected to: -5V 60% · a signal 40% | — |
| ENpin 3 | Connected to: -5V 60% · a signal 40% | — |
| NRpin 4 | Connected to: Signal 100% |
|
| OUTpin 5 | Connected to: Signal 80% · 2.5V 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RatEEG by tharaka27, PCBs by jwmke, 8-Channel-Wireless-EEG by unaldevelopment and Final handsEMG by blakep7.
The TPS72325DBVT in open source designs
The gallery holds 6 open source boards using the TPS72325DBVT from 5 GitHub repositories; a typical one measures about 76 × 52.7 mm and carries around 103 components.
67% use four copper layers or more, and 50% carry an open source license.
The most starred is RatEEG by tharaka27.
Parts used alongside the TPS72325DBVT
Microcontrollers on boards using the TPS72325DBVT
What boards using the TPS72325DBVT are built for
TPS72325DBVT: common questions
Where can I find a TPS72325DBVT reference design?
Each of the 6 boards on this page is a real design using the TPS72325DBVT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS72325DBVT NR pin connected?
The NR pin has a capacitor to GND on 5 of 5 designs, most often 10 nF. Counted from the KiCad layouts of 5 open source designs using the TPS72325DBVT.
How is the TPS72325DBVT OUT pin connected?
The OUT pin has a capacitor to GND on 5 of 5 designs, most often 10 µF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the TPS72325DBVT.
How is the TPS72325DBVT IN pin connected?
The IN pin is tied to -5V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the TPS72325DBVT.
Which microcontrollers do boards using the TPS72325DBVT use?
Most are built on STM32 (2).
How big is a typical board using the TPS72325DBVT?
The median is 76 × 52.7 mm, and 33% are two-layer designs.
What is the most popular open source board using the TPS72325DBVT?
By GitHub stars, RatEEG by tharaka27, with 11 stars.
Can I simulate one of these boards using the TPS72325DBVT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.