2 open source boards using the TPS7A2633DRV
Real designs built with the TPS7A2633DRV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
WCH CH32/CH55x
CACKLE-PSU-2s 40A PSU and charger
techy-robot
45 × 20 mm95 parts4LCC-BY-NC-4.00WCH CH32/CH55x
CACKLE-PSU-USB 2A PSU 1side
techy-robot
30 × 20 mm42 parts2LCC-BY-NC-4.00
The TPS7A2633DRV in open source designs
The gallery holds 2 open source boards using the TPS7A2633DRV from 2 GitHub repositories; a typical one measures about 37.5 × 20 mm and carries around 69 components.
50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is CACKLE-PSU-2s 40A PSU and charger by techy-robot.
Parts used alongside the TPS7A2633DRV
Microcontrollers on boards using the TPS7A2633DRV
What boards using the TPS7A2633DRV are built for
TPS7A2633DRV: common questions
Where can I find a TPS7A2633DRV reference design?
Each of the 2 boards on this page is a real design using the TPS7A2633DRV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPS7A2633DRV?
The AP63203WU, CH32X035G8U6 and THVD1420DRLR appear in the most repositories here.
Which microcontrollers do boards using the TPS7A2633DRV use?
Most are built on WCH CH32/CH55x (2).
How big is a typical board using the TPS7A2633DRV?
The median is 37.5 × 20 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPS7A2633DRV?
By GitHub stars, CACKLE-PSU-2s 40A PSU and charger by techy-robot, with 0 stars.
Can I simulate one of these boards using the TPS7A2633DRV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.