7 open source boards using the TPS7A9401DSCR
Real designs built with the TPS7A9401DSCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Combined Module Panel
esl-epfl
93.2 × 113 mm628 parts6LNo license3MosaicG5-HAT
septentrio-gnss
65.8 × 56.1 mm51 parts4LNo license2BitForge-SDR
HarrySkySon
100 × 85 mm332 parts6LCERN-OHL-S-2.01NXP
TeenG5
septentrio-gnss
62.8 × 27 mm39 parts4LNo license1ESP32
WirelessBERA
NathansLab
73 × 94 mm153 parts4LNo license0ADC Board
esl-epfl
15.6 × 19.7 mm56 parts6LNo license3ExtendedRangeSupply
esl-epfl
15.3 × 45.8 mm41 parts4LNo license2
How designs wire the TPS7A9401DSCR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPS7A9401DSCR connects to, and the resistors, capacitors and other passives placed on it.
- The FB_PG pin has a resistor to GND on 6 of 6 designs, most often 12.4 kΩ (then 10 kΩ).
- The FB_PG pin has a pull-up to 3.3V on 5 of 6 designs, most often 187 kΩ (then 1.33 MΩ).
- The NR/SS pin has a capacitor to GND on 5 of 6 designs, most often 4.7 µF (then 1 µF).
- The THERMAL_PAD_11 pin is tied to GND on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IN_1pin 1 | Connected to: 5V 83% · a signal 17% |
|
| IN_2pin 2 | Connected to: 5V 83% · a signal 17% |
|
| EN_UVpin 3 | Connected to: 3.7V 50% · a signal 50% |
|
| PGpin 4 | Connected to: Not connected 67% · GND 33% | — |
| FB_PGpin 5 | Connected to: Signal 100% |
|
| GNDpin 6 | Connected to: GND 100% | — |
| NR/SSpin 7 | Connected to: Signal 100% |
|
| SNSpin 8 | Connected to: 3.3V 83% · a signal 17% | — |
| OUT_9pin 9 | Connected to: 3.3V 83% · a signal 17% | — |
| OUT_10pin 10 | Connected to: 3.3V 83% · a signal 17% | — |
| THERMAL_PAD_11pin 11 | Connected to: GND 100% | — |
| GND_12pin 12 | Connected to: GND 100% | — |
| GND_13pin 13 | Connected to: GND 100% | — |
| GND_14pin 14 | Connected to: GND 100% | — |
| GND_15pin 15 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ADC Board by esl-epfl, ExtendedRangeSupply by esl-epfl, MosaicG5-HAT by septentrio-gnss and BitForge-SDR by HarrySkySon.
The TPS7A9401DSCR in open source designs
The gallery holds 7 open source boards using the TPS7A9401DSCR from 6 GitHub repositories; a typical one measures about 65.8 × 56.1 mm and carries around 56 components.
100% use four copper layers or more, and 14% carry an open source license.
The most starred is Combined Module Panel by esl-epfl.
Parts used alongside the TPS7A9401DSCR
What boards using the TPS7A9401DSCR are built for
TPS7A9401DSCR: common questions
Where can I find a TPS7A9401DSCR reference design?
Each of the 7 boards on this page is a real design using the TPS7A9401DSCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TPS7A9401DSCR FB_PG pin?
The FB_PG pin has a resistor to GND on 6 of 6 designs, most often 12.4 kΩ (then 10 kΩ). Counted from the KiCad layouts of 6 open source designs using the TPS7A9401DSCR.
How is the TPS7A9401DSCR NR/SS pin connected?
The NR/SS pin has a capacitor to GND on 5 of 6 designs, most often 4.7 µF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the TPS7A9401DSCR.
How is the TPS7A9401DSCR THERMAL_PAD_11 pin connected?
The THERMAL_PAD_11 pin is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TPS7A9401DSCR.
Which microcontrollers do boards using the TPS7A9401DSCR use?
Most are built on ESP32 (1) and NXP (1).
How big is a typical board using the TPS7A9401DSCR?
The median is 65.8 × 56.1 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPS7A9401DSCR?
By GitHub stars, Combined Module Panel by esl-epfl, with 3 stars.
Can I simulate one of these boards using the TPS7A9401DSCR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.