5 open source boards using the HMC431LP4

Real designs built with the HMC431LP4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The HMC431LP4 in open source designs

The gallery holds 5 open source boards using the HMC431LP4 from 3 GitHub repositories; a typical one measures about 90.2 × 40 mm and carries around 264 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Radar v2 by ckflight.

Microcontrollers on boards using the HMC431LP4

What boards using the HMC431LP4 are built for

HMC431LP4: common questions

Where can I find a HMC431LP4 reference design?

Each of the 5 boards on this page is a real design using the HMC431LP4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the HMC431LP4?

The 5400BL15B050E, ADF4158, SKY65404, TRF37A73 and ADC_Connector appear in the most repositories here.

Which microcontrollers do boards using the HMC431LP4 use?

Most are built on STM32 (2) and FPGA (1).

How big is a typical board using the HMC431LP4?

The median is 90.2 × 40 mm, and 0% are two-layer designs.

What is the most popular open source board using the HMC431LP4?

By GitHub stars, Radar v2 by ckflight, with 55 stars.

Can I simulate one of these boards using the HMC431LP4 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part