8 open source boards using the ADL5801

Real designs built with the ADL5801, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the ADL5801

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ADL5801 connects to, and the resistors, capacitors and other passives placed on it.

  • The VPLO pins have a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 nF).
  • The VSET pin has a capacitor to GND on 5 of 6 designs, most often 100 nF (then 1 nF).
  • The VPDT pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 nF).
  • The RFIN pin has a series capacitor on 5 of 6 designs, most often 10 pF (then 1 nF).
GNDpin 1, 2, 5, 6, 8, 12, 14, 17, 19, 23, 25Connected to: GND 100%
LOIPpin 3Connected to: Signal 83% · not connected 17%
  • Series capacitor on 50% · 10 pF (2), 100 nF (1)
LOINpin 4Connected to: Signal 83% · not connected 17%
  • Series capacitor on 33% · 10 pF (2)
VPLOpin 7, 24Connected to: 5V 67% · not connected 17% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (21), 10 nF (8), 100 pF (7)
VSETpin 10Connected to: Signal 83% · not connected 17%
  • Capacitor to GND on 83% · 100 nF (6), 1 nF (1), 100 pF (1)
  • Pull-up to 5V on 67% · 1 kΩ (3), 1.5 kΩ (1)
  • Resistor to GND on 50% · 3.9 kΩ (1)
DETOpin 11Connected to: Signal 83% · not connected 17%
  • Capacitor to GND on 67% · 100 nF (3), 100 pF (2), 1 nF (1)
VPDTpin 13Connected to: 5V 67% · not connected 17% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (12), 10 nF (4), 100 pF (2)
RFINpin 15Connected to: Signal 83% · not connected 17%
  • Series capacitor on 83% · 10 pF (2), 1 nF (2), 100 nF (1)
RFIPpin 16Connected to: Signal 83% · not connected 17%
  • Series capacitor on 67% · 10 pF (2), 100 nF (1), 1 nF (1)
VPRFpin 18Connected to: 5V 67% · not connected 17% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (12), 10 nF (4), 100 pF (2)
IFOPpin 20Connected to: Signal 83% · not connected 17%
  • Pull-up to 5V on 33% · 50 Ω (2)
  • Series resistor on 33% · 0 Ω (2)
IFONpin 21Connected to: Signal 83% · not connected 17%
  • Pull-up to 5V on 33% · 50 Ω (2)
  • Series resistor on 33% · 0 Ω (2)
NCpin 22Connected to: Not connected 100%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LibreVNA by jankae, Radar RF by ckflight, Radar RF by TonyStark2007 and Mini-Spectrum-Analyzer- by Dhruv2212-star.

The ADL5801 in open source designs

The gallery holds 8 open source boards using the ADL5801 from 6 GitHub repositories; a typical one measures about 70.1 × 40 mm and carries around 195 components.

100% use four copper layers or more, and 63% carry an open source license.

The most starred is LibreVNA by jankae.

Microcontrollers on boards using the ADL5801

What boards using the ADL5801 are built for

ADL5801: common questions

Where can I find a ADL5801 reference design?

Each of the 8 boards on this page is a real design using the ADL5801. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ADL5801 VPLO pin?

The VPLO pins have a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 6 open source designs using the ADL5801.

How is the ADL5801 VSET pin connected?

The VSET pin has a capacitor to GND on 5 of 6 designs, most often 100 nF (then 1 nF). Counted from the KiCad layouts of 6 open source designs using the ADL5801.

What decoupling capacitors do designs use on the ADL5801 VPDT pin?

The VPDT pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 6 open source designs using the ADL5801.

What parts are used alongside the ADL5801?

The 5400BL15B050E, ADC_Connector, ADF4158, ADF4351 and AP3211 appear in the most repositories here.

Which microcontrollers do boards using the ADL5801 use?

Most are built on STM32 (4) and ESP32 (1).

How big is a typical board using the ADL5801?

The median is 70.1 × 40 mm, and 0% are two-layer designs.

What is the most popular open source board using the ADL5801?

By GitHub stars, LibreVNA by jankae, with 1,636 stars.

Can I simulate one of these boards using the ADL5801 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part