5 open source boards using the TSR2-2450

Real designs built with the TSR2-2450, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TSR2-2450

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TSR2-2450 connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a capacitor to GND on 2 of 5 designs, most often 100 µF (then 10 µF).
  • The VOUT pin has a decoupling capacitor on 2 of 5 designs, most often 10 µF (then 1 µF).
VINpin 1Connected to: Signal 60% · 12V 40%
  • Capacitor to GND on 40% · 100 µF (2), 10 µF (1)
GNDpin 2Connected to: GND 100%
VOUTpin 3Connected to: 5V 80% · a signal 20%
  • Decoupling capacitor on 40% · 10 µF (2), 1 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Acoustic levitation main by leastrobino, Power Control Card new by lbrosnan1, Traveo hmi power board by SAakbarnezhad and WoMoHome by Sharki-66.

The TSR2-2450 in open source designs

The gallery holds 5 open source boards using the TSR2-2450 from 5 GitHub repositories; a typical one measures about 100 × 65 mm and carries around 66 components.

80% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.

The most starred is Acoustic levitation main by leastrobino.

Microcontrollers on boards using the TSR2-2450

TSR2-2450: common questions

Where can I find a TSR2-2450 reference design?

Each of the 5 boards on this page is a real design using the TSR2-2450. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TSR2-2450 VIN pin connected?

The VIN pin has a capacitor to GND on 2 of 5 designs, most often 100 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the TSR2-2450.

What decoupling capacitors do designs use on the TSR2-2450 VOUT pin?

The VOUT pin has a decoupling capacitor on 2 of 5 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the TSR2-2450.

Which microcontrollers do boards using the TSR2-2450 use?

Most are built on AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the TSR2-2450?

The median is 100 × 65 mm, and 80% are two-layer designs.

What is the most popular open source board using the TSR2-2450?

By GitHub stars, Acoustic levitation main by leastrobino, with 21 stars.

Can I simulate one of these boards using the TSR2-2450 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part