6 open source boards using the TXS0102DCTR

Real designs built with the TXS0102DCTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The TXS0102DCTR in open source designs

The gallery holds 6 open source boards using the TXS0102DCTR from 4 GitHub repositories; a typical one measures about 76.4 × 81.7 mm and carries around 26 components.

100% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is 4x Mini Controller by sullyjason.

Microcontrollers on boards using the TXS0102DCTR

TXS0102DCTR: common questions

Where can I find a TXS0102DCTR reference design?

Each of the 6 boards on this page is a real design using the TXS0102DCTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TXS0102DCTR use?

Most are built on ESP32 (4) and Raspberry Pi (1).

How big is a typical board using the TXS0102DCTR?

The median is 76.4 × 81.7 mm, and 100% are two-layer designs.

What is the most popular open source board using the TXS0102DCTR?

By GitHub stars, 4x Mini Controller by sullyjason, with 1 stars.

Can I simulate one of these boards using the TXS0102DCTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part