5 open source boards using the TXS0104ERGYR
Real designs built with the TXS0104ERGYR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Qcomlt debugboard
CodeLinaro-mirror
20 × 55.7 mm38 parts4LCERN-OHL-P-2.00Boardoza LSM303 Triple Axis Accelerometer Magnetometer Breakout Board
Boardoza
20 × 20 mm15 parts2LCC-BY-SA-4.00PCB C
dragondgold
54 × 54 mm39 parts2LGPL-3.01RP2040/RP2350
Frank air
rh1tech
85.6 × 54 mm176 parts4LGPL-3.03RP2040/RP2350
Minifrank
rh1tech
85.6 × 54 mm139 parts4LGPL-3.065
How designs wire the TXS0104ERGYR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TXS0104ERGYR connects to, and the resistors, capacitors and other passives placed on it.
- The VCCA_1 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The VCCB_14 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The NC_1_6 pin is left unconnected on 5 of 5 designs.
- The NC_2_9 pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCA_1pin 1 | Connected to: 3.3V 100% |
|
| A1_2pin 2 | Connected to: The microcontroller 40% |
|
| A2_3pin 3 | Connected to: The microcontroller 40% |
|
| A3_4pin 4 | Connected to: A connector 60%, the microcontroller 40% |
|
| A4_5pin 5 | Connected to: A connector 60%, the microcontroller 40% |
|
| NC_1_6pin 6 | Connected to: Not connected 100% | — |
| GND_7pin 7 | Connected to: GND 100% | — |
| OE_8pin 8 | Connected to: Signal 60% · 3.3V 40% |
|
| NC_2_9pin 9 | Connected to: Not connected 100% | — |
| VCCB_14pin 14 | Connected to: VBUS 100% |
|
| THERMAL_PAD_15pin 15 | Connected to: GND 100% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Minifrank by rh1tech, Frank air by rh1tech, PCB C by dragondgold and Boardoza LSM303 Triple Axis Accelerometer Magnetometer Breakout Board by Boardoza.
The TXS0104ERGYR in open source designs
The gallery holds 5 open source boards using the TXS0104ERGYR from 5 GitHub repositories; a typical one measures about 54 × 54 mm and carries around 39 components.
60% use four copper layers or more, and 100% carry an open source license.
The most starred is Minifrank by rh1tech.
Parts used alongside the TXS0104ERGYR
Microcontrollers on boards using the TXS0104ERGYR
What boards using the TXS0104ERGYR are built for
TXS0104ERGYR: common questions
Where can I find a TXS0104ERGYR reference design?
Each of the 5 boards on this page is a real design using the TXS0104ERGYR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TXS0104ERGYR VCCA_1 pin?
The VCCA_1 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the TXS0104ERGYR.
What decoupling capacitors do designs use on the TXS0104ERGYR VCCB_14 pin?
The VCCB_14 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the TXS0104ERGYR.
How is the TXS0104ERGYR NC_1_6 pin connected?
The NC_1_6 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TXS0104ERGYR.
What parts are used alongside the TXS0104ERGYR?
The AMS1117-3.3, CD4069UBM, LM358, MW7211A and RP2350 appear in the most repositories here.
Which microcontrollers do boards using the TXS0104ERGYR use?
Most are built on RP2040/RP2350 (2) and Microchip SAM (1).
How big is a typical board using the TXS0104ERGYR?
The median is 54 × 54 mm, and 40% are two-layer designs.
What is the most popular open source board using the TXS0104ERGYR?
By GitHub stars, Minifrank by rh1tech, with 65 stars.
Can I simulate one of these boards using the TXS0104ERGYR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.