13 open source boards using the TS3USB221RSER

Real designs built with the TS3USB221RSER, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the TS3USB221RSER

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TS3USB221RSER connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC_10 pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
  • The OE_6 pin is tied to GND on 4 of 6 designs (a signal on 2).
GND_5pin 5Connected to: GND 100%
OE_6pin 6Connected to: GND 67% · a signal 33%
D-_7pin 7Connected to: A connector 33%
  • Series resistor on 33% · 27 Ω (2)
D+_8pin 8Connected to: A connector 33%
  • Series resistor on 33% · 27 Ω (2)
S_9pin 9Connected to: Signal 100%
  • Resistor to GND on 33% · 10 kΩ (2)
  • Pull-up to 3.3V on 33% · 10 kΩ (2)
VCC_10pin 10Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (7), 10 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Wall Panel by dotstartech, Frank core2u by rh1tech, TRNXSDR-carrier by acruxcz and Dino z80 by rh1tech.

The TS3USB221RSER in open source designs

The gallery holds 13 open source boards using the TS3USB221RSER from 6 GitHub repositories; a typical one measures about 85.6 × 55 mm and carries around 190 components.

100% use four copper layers or more, and 92% carry an open source license.

The most starred is Wall Panel by dotstartech.

Microcontrollers on boards using the TS3USB221RSER

TS3USB221RSER: common questions

Where can I find a TS3USB221RSER reference design?

Each of the 13 boards on this page is a real design using the TS3USB221RSER. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TS3USB221RSER VCC_10 pin?

The VCC_10 pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the TS3USB221RSER.

How is the TS3USB221RSER OE_6 pin connected?

The OE_6 pin is tied to GND on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the TS3USB221RSER.

What parts are used alongside the TS3USB221RSER?

The AMS1117-3.3, USBLC6-2SC6, 74HC4052BQ,115, AO3401A and APS6404L-3SQR-ZR appear in the most repositories here.

Which microcontrollers do boards using the TS3USB221RSER use?

Most are built on RP2040/RP2350 (9), Raspberry Pi (2) and STM32 (1).

How big is a typical board using the TS3USB221RSER?

The median is 85.6 × 55 mm, and 0% are two-layer designs.

What is the most popular open source board using the TS3USB221RSER?

By GitHub stars, Wall Panel by dotstartech, with 366 stars.

Can I simulate one of these boards using the TS3USB221RSER before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part