4 open source boards using the USB2513B-AEZC
Real designs built with the USB2513B-AEZC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Fpga mocap
TobiasJaeggi
60.6 × 100 mm188 parts6LGPL-3.01STM32
CpuAddOn
logisim-evolution
60.6 × 100 mm138 parts6LMIT18ESP32
AddOnTemplate
logisim-evolution
97.4 × 53.4 mm84 parts2LMIT18ESP32
PerifAddOn
logisim-evolution
60.6 × 75.2 mm69 parts4LMIT18
The USB2513B-AEZC in open source designs
The gallery holds 4 open source boards using the USB2513B-AEZC from 2 GitHub repositories; a typical one measures about 60.6 × 87.6 mm and carries around 111 components.
75% use four copper layers or more, and 100% carry an open source license.
The most starred is CpuAddOn by logisim-evolution.
Parts used alongside the USB2513B-AEZC
What boards using the USB2513B-AEZC are built for
USB2513B-AEZC: common questions
Where can I find a USB2513B-AEZC reference design?
Each of the 4 boards on this page is a real design using the USB2513B-AEZC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the USB2513B-AEZC?
The AP2281-3WG-7, FT231XQ and NCP1529A appear in the most repositories here.
Which microcontrollers do boards using the USB2513B-AEZC use?
Most are built on ESP32 (2) and STM32 (2).
How big is a typical board using the USB2513B-AEZC?
The median is 60.6 × 87.6 mm, and 25% are two-layer designs.
What is the most popular open source board using the USB2513B-AEZC?
By GitHub stars, CpuAddOn by logisim-evolution, with 18 stars.
Can I simulate one of these boards using the USB2513B-AEZC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.