5 open source boards using the AP2281-3WG-7

Real designs built with the AP2281-3WG-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The AP2281-3WG-7 in open source designs

The gallery holds 5 open source boards using the AP2281-3WG-7 from 3 GitHub repositories; a typical one measures about 60.6 × 100 mm and carries around 138 components.

80% use four copper layers or more, and 80% carry an open source license.

The most starred is My jetson nano baseboard by NVIDIA-AI-IOT.

Parts used alongside the AP2281-3WG-7

Microcontrollers on boards using the AP2281-3WG-7

What boards using the AP2281-3WG-7 are built for

AP2281-3WG-7: common questions

Where can I find a AP2281-3WG-7 reference design?

Each of the 5 boards on this page is a real design using the AP2281-3WG-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the AP2281-3WG-7?

The FT231XQ, NCP1529A and USB2513B-AEZC appear in the most repositories here.

Which microcontrollers do boards using the AP2281-3WG-7 use?

Most are built on ESP32 (2) and STM32 (2).

How big is a typical board using the AP2281-3WG-7?

The median is 60.6 × 100 mm, and 20% are two-layer designs.

What is the most popular open source board using the AP2281-3WG-7?

By GitHub stars, My jetson nano baseboard by NVIDIA-AI-IOT, with 91 stars.

Can I simulate one of these boards using the AP2281-3WG-7 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part