7 open source boards using the VNH5019A-E
Real designs built with the VNH5019A-E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
TheraPatch
noahalam77-code
61.3 × 61.8 mm82 parts4LMIT0STM32
StonePCR
andykamin3
77.6 × 102.5 mm49 parts2LGPL-3.00Power
Keisuke063
75 × 75 mm22 parts2LNo license1DriverModule
cpeniche
100.6 × 67.1 mm69 parts4LNo license0MotorDriverBreakout
MissouriMRDT
50.2 × 12.1 mm4 parts2LNo license0RP2040/RP2350
Drive
MUNAKATA-EPC
53 × 72.8 mm39 parts4LNo license1RP2040/RP2350
Drive
MUNAKATA-EPC
62.9 × 77.9 mm55 parts2LNo license0
How designs wire the VNH5019A-E
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the VNH5019A-E connects to, and the resistors, capacitors and other passives placed on it.
- The INA pin has a series resistor on 5 of 7 designs, most often 1 kΩ.
- The EN/DIAGA pin has a pull-up to 3.3V on 5 of 7 designs, most often 3.3 kΩ (then 4.7 kΩ).
- The EN/DIAGB pin has a pull-up to 3.3V on 5 of 7 designs, most often 3.3 kΩ (then 4.7 kΩ).
- The INB pin has a series resistor on 5 of 7 designs, most often 1 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 2, 14, 17, 22, 24, 29 | Connected to: Not connected 100% | — |
| VCCpin 3, 13, 23, 31 | Connected to: 12V 57% · a signal 43% |
|
| INApin 4 | Connected to: Signal 100% |
|
| EN/DIAGApin 5 | Connected to: Signal 100% |
|
| PWMpin 7 | Connected to: Signal 100% |
|
| CSpin 8 | Connected to: Not connected 57% · a signal 43% |
|
| EN/DIAGBpin 9 | Connected to: Signal 100% |
|
| INBpin 10 | Connected to: Signal 100% |
|
| VBATpin 12 | Connected to: 12V 86% | — |
| GNDBpin 18, 19, 20 | Connected to: GND 86% | — |
| GNDApin 26, 27, 28 | Connected to: GND 86% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Power by Keisuke063, Drive by MUNAKATA-EPC, StonePCR by andykamin3 and DriverModule by cpeniche.
The VNH5019A-E in open source designs
The gallery holds 7 open source boards using the VNH5019A-E from 7 GitHub repositories; a typical one measures about 62.9 × 72.8 mm and carries around 49 components.
57% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Drive by MUNAKATA-EPC.
Microcontrollers on boards using the VNH5019A-E
What boards using the VNH5019A-E are built for
VNH5019A-E: common questions
Where can I find a VNH5019A-E reference design?
Each of the 7 boards on this page is a real design using the VNH5019A-E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the VNH5019A-E INA pin?
The INA pin has a series resistor on 5 of 7 designs, most often 1 kΩ. Counted from the KiCad layouts of 7 open source designs using the VNH5019A-E.
What pull-up resistor is used on the VNH5019A-E EN/DIAGA pin?
The EN/DIAGA pin has a pull-up to 3.3V on 5 of 7 designs, most often 3.3 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 7 open source designs using the VNH5019A-E.
What pull-up resistor is used on the VNH5019A-E EN/DIAGB pin?
The EN/DIAGB pin has a pull-up to 3.3V on 5 of 7 designs, most often 3.3 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 7 open source designs using the VNH5019A-E.
Which microcontrollers do boards using the VNH5019A-E use?
Most are built on RP2040/RP2350 (2), AVR/Arduino (1) and STM32 (1).
How big is a typical board using the VNH5019A-E?
The median is 62.9 × 72.8 mm, and 57% are two-layer designs.
What is the most popular open source board using the VNH5019A-E?
By GitHub stars, Drive by MUNAKATA-EPC, with 1 stars.
Can I simulate one of these boards using the VNH5019A-E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.