6 open source boards using the VNLD5160TR-E
Real designs built with the VNLD5160TR-E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Proteus
mck1117
135 × 82.5 mm348 parts4LNo license50Uaefi
rusefi
100 × 100 mm164 parts4LNo license36Hellen-112-17
rusefi
86.3 × 97.1 mm125 parts4LNo license4Hellen154hyundai
rusefi
164 × 156 mm201 parts4LNo license1Hellen-PROLT
ADVecu
80 × 80 mm80 parts4LNo license0UaBrain gm e38
rusefi
149 × 105.9 mm129 parts4LNo license48
How designs wire the VNLD5160TR-E
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the VNLD5160TR-E connects to, and the resistors, capacitors and other passives placed on it.
- The IN1 pin has a series resistor on 6 of 6 designs, most often 4.7 kΩ (then 1 kΩ).
- The IN2 pin has a series resistor on 6 of 6 designs, most often 4.7 kΩ (then 1 kΩ).
- The STATUS1 pin is left unconnected on 6 of 6 designs.
- The STATUS2 pin is left unconnected on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IN1pin 1 | Connected to: Signal 100% |
|
| STATUS1pin 2 | Connected to: Not connected 100% | — |
| IN2pin 3 | Connected to: Signal 100% |
|
| STATUS2pin 4 | Connected to: Not connected 100% | — |
| S2pin 5 | Connected to: GND 100% | — |
| S1pin 7 | Connected to: GND 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Proteus by mck1117, UaBrain gm e38 by rusefi, Uaefi by rusefi and Hellen-112-17 by rusefi.
The VNLD5160TR-E in open source designs
The gallery holds 6 open source boards using the VNLD5160TR-E from 6 GitHub repositories; a typical one measures about 117.5 × 98.5 mm and carries around 147 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Proteus by mck1117.
Parts used alongside the VNLD5160TR-E
Microcontrollers on boards using the VNLD5160TR-E
What boards using the VNLD5160TR-E are built for
VNLD5160TR-E: common questions
Where can I find a VNLD5160TR-E reference design?
Each of the 6 boards on this page is a real design using the VNLD5160TR-E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the VNLD5160TR-E IN1 pin?
The IN1 pin has a series resistor on 6 of 6 designs, most often 4.7 kΩ (then 1 kΩ). Counted from the KiCad layouts of 6 open source designs using the VNLD5160TR-E.
What resistor goes on the VNLD5160TR-E IN2 pin?
The IN2 pin has a series resistor on 6 of 6 designs, most often 4.7 kΩ (then 1 kΩ). Counted from the KiCad layouts of 6 open source designs using the VNLD5160TR-E.
How is the VNLD5160TR-E STATUS1 pin connected?
The STATUS1 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the VNLD5160TR-E.
What parts are used alongside the VNLD5160TR-E?
The TLE9201SG, LPS25HB and MCP6002-XSN appear in the most repositories here.
Which microcontrollers do boards using the VNLD5160TR-E use?
Most are built on STM32 (1).
How big is a typical board using the VNLD5160TR-E?
The median is 117.5 × 98.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the VNLD5160TR-E?
By GitHub stars, Proteus by mck1117, with 50 stars.
Can I simulate one of these boards using the VNLD5160TR-E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.