4 open source boards using the W25Q64JVZPIQ

Real designs built with the W25Q64JVZPIQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The W25Q64JVZPIQ in open source designs

The gallery holds 4 open source boards using the W25Q64JVZPIQ from 4 GitHub repositories; a typical one measures about 32 × 51 mm and carries around 71 components.

67% use four copper layers or more, and 75% carry an open source license.

The most starred is SPINC by CoretechR.

Parts used alongside the W25Q64JVZPIQ

Microcontrollers on boards using the W25Q64JVZPIQ

W25Q64JVZPIQ: common questions

Where can I find a W25Q64JVZPIQ reference design?

Each of the 4 boards on this page is a real design using the W25Q64JVZPIQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the W25Q64JVZPIQ?

The AP2112K-3.3, RP2040 and USBLC6-2P6 appear in the most repositories here.

Which microcontrollers do boards using the W25Q64JVZPIQ use?

Most are built on RP2040/RP2350 (3) and STM32 (1).

How big is a typical board using the W25Q64JVZPIQ?

The median is 32 × 51 mm, and 33% are two-layer designs.

What is the most popular open source board using the W25Q64JVZPIQ?

By GitHub stars, SPINC by CoretechR, with 463 stars.

Can I simulate one of these boards using the W25Q64JVZPIQ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part