5 open source boards using the WS2812-2020
Real designs built with the WS2812-2020, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TridentSkirtLights
Gi7mo
22.6 × 23.5 mm14 parts2LGPL-3.018ESP32
ProtoBoard
ciborg971
56 × 48 mm84 parts4LMIT5ESP32
Kronos-Hardware
AddeyX
65.6 × 91.8 mm144 parts4LNo license1RP2040/RP2350
Picov
vibsthebot
21.3 × 51.3 mm50 parts2LNo license1Gliss led
BelaPlatform
17.6 × 83.6 mm56 parts2LNo license18
How designs wire the WS2812-2020
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the WS2812-2020 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 100% | — |
| VDDpin 4 | Connected to: 5V 80% · a signal 20% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gliss led by BelaPlatform, TridentSkirtLights by Gi7mo, ProtoBoard by ciborg971 and Kronos-Hardware by AddeyX.
The WS2812-2020 in open source designs
The gallery holds 5 open source boards using the WS2812-2020 from 5 GitHub repositories; a typical one measures about 22.6 × 51.3 mm and carries around 56 components.
60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Gliss led by BelaPlatform.
Parts used alongside the WS2812-2020
Microcontrollers on boards using the WS2812-2020
What boards using the WS2812-2020 are built for
WS2812-2020: common questions
Where can I find a WS2812-2020 reference design?
Each of the 5 boards on this page is a real design using the WS2812-2020. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the WS2812-2020 VDD pin?
The VDD pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the WS2812-2020.
Which microcontrollers do boards using the WS2812-2020 use?
Most are built on ESP32 (2) and RP2040/RP2350 (1).
How big is a typical board using the WS2812-2020?
The median is 22.6 × 51.3 mm, and 60% are two-layer designs.
What is the most popular open source board using the WS2812-2020?
By GitHub stars, Gliss led by BelaPlatform, with 18 stars.
Can I simulate one of these boards using the WS2812-2020 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.