10 open source boards using the XC6206P282MR
Real designs built with the XC6206P282MR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
V2.0
cornway
77 × 40 mm146 parts4LNo license6ESP32
Soft-Robotics
esb8
49.9 × 47.3 mm84 parts4LCustom license4Doorlink
calebhabesh
59 × 91 mm88 parts2LMIT2RP2040/RP2350
Robot link
sequoia-hope
28 × 63 mm93 parts6LNo license0ESP32
ESP32-S3 Camera
LCQIANN
60 × 85 mm60 parts4LNo license0STM32
Family lace
SomniumUrani
46.5 × 55.5 mm51 parts4LNo license0STM32
V0.1
cornway
65.7 × 45.8 mm104 parts4LNo license6ESP32
ESP32-S3 Camera
LCQIANN
60 × 85 mm60 parts4LNo license0ESP32
Wireless Image Transmission
NekoPurrTech
27 × 27 mm52 parts2LNo license0STM32
V1.0
cornway
35 × 44 mm69 parts4LNo license6
How designs wire the XC6206P282MR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the XC6206P282MR connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 7 of 7 designs, most often 1 µF (then 100 nF).
- The VI pin has a decoupling capacitor on 7 of 7 designs, most often 1 µF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 2.8V 57% · a signal 43% |
|
| VIpin 3 | Connected to: 3.3V 57% · a signal 43% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include V0.1 by cornway, Soft-Robotics by esb8, Doorlink by calebhabesh and ESP32-S3 Camera by LCQIANN.
The XC6206P282MR in open source designs
The gallery holds 10 open source boards using the XC6206P282MR from 7 GitHub repositories; a typical one measures about 54.4 × 51.4 mm and carries around 77 components.
80% use four copper layers or more, and 10% carry an open source license.
The most starred is V2.0 by cornway.
Parts used alongside the XC6206P282MR
Microcontrollers on boards using the XC6206P282MR
What boards using the XC6206P282MR are built for
XC6206P282MR: common questions
Where can I find a XC6206P282MR reference design?
Each of the 10 boards on this page is a real design using the XC6206P282MR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the XC6206P282MR VO pin?
The VO pin has a decoupling capacitor on 7 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the XC6206P282MR.
What decoupling capacitors do designs use on the XC6206P282MR VI pin?
The VI pin has a decoupling capacitor on 7 of 7 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the XC6206P282MR.
What parts are used alongside the XC6206P282MR?
The XC6206P122MR, ESP32-S3-WROOM-1-N16R8 and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the XC6206P282MR use?
Most are built on ESP32 (4), STM32 (4) and RP2040/RP2350 (1).
How big is a typical board using the XC6206P282MR?
The median is 54.4 × 51.4 mm, and 20% are two-layer designs.
What is the most popular open source board using the XC6206P282MR?
By GitHub stars, V2.0 by cornway, with 6 stars.
Can I simulate one of these boards using the XC6206P282MR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.