7 open source boards using the XC6220B331
Real designs built with the XC6220B331, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Omote
OMOTE-Community
192.4 × 50 mm135 parts2LGPL-3.0153Microchip SAM
EasyHive M0
jacobron
35 × 75 mm101 partsNo license4Microchip SAM
Easyhive
easyhive
35 × 75 mm106 partsNo license1ESP32
Omote
KlausMu
192.4 × 50 mm135 parts2LGPL-3.00RP2040/RP2350
OMOTE
Porshe2010
192.4 × 50 mm105 parts2LGPL-3.00RP2040/RP2350
Remote
OMOTE-Community
192.4 × 50 mm105 parts2LGPL-3.0153RP2040/RP2350
Remote
KlausMu
192.4 × 50 mm105 parts2LGPL-3.00
How designs wire the XC6220B331
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the XC6220B331 connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a capacitor to GND on 5 of 5 designs, most often 10 µF.
- The CE pin has a capacitor to GND on 5 of 5 designs, most often 10 µF.
- The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: Signal 60% · VCC 40% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| CEpin 3 | Connected to: Signal 60% · VCC 40% |
|
| NCpin 4 | Connected to: Not connected 100% | — |
| VOUTpin 5 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omote by OMOTE-Community, EasyHive M0 by jacobron, Easyhive kicad by easyhive and Omote by KlausMu.
The XC6220B331 in open source designs
The gallery holds 7 open source boards using the XC6220B331 from 5 GitHub repositories; a typical one measures about 192.4 × 50 mm and carries around 105 components.
100% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.
The most starred is Omote by OMOTE-Community.
Parts used alongside the XC6220B331
Microcontrollers on boards using the XC6220B331
What boards using the XC6220B331 are built for
XC6220B331: common questions
Where can I find a XC6220B331 reference design?
Each of the 7 boards on this page is a real design using the XC6220B331. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the XC6220B331 VIN pin connected?
The VIN pin has a capacitor to GND on 5 of 5 designs, most often 10 µF. Counted from the KiCad layouts of 5 open source designs using the XC6220B331.
How is the XC6220B331 CE pin connected?
The CE pin has a capacitor to GND on 5 of 5 designs, most often 10 µF. Counted from the KiCad layouts of 5 open source designs using the XC6220B331.
What decoupling capacitors do designs use on the XC6220B331 VOUT pin?
The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the XC6220B331.
What parts are used alongside the XC6220B331?
The AP2112K-3.3, CH340C, ESP32-PICO-D4, LIS3DHTR and MCP73831-2-OT appear in the most repositories here.
Which microcontrollers do boards using the XC6220B331 use?
Most are built on RP2040/RP2350 (3), ESP32 (2) and Microchip SAM (2).
How big is a typical board using the XC6220B331?
The median is 192.4 × 50 mm, and 100% are two-layer designs.
What is the most popular open source board using the XC6220B331?
By GitHub stars, Omote by OMOTE-Community, with 153 stars.
Can I simulate one of these boards using the XC6220B331 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.