15 open source boards using the xiao-ble

Real designs built with the xiao-ble, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the xiao-ble

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the xiao-ble connects to, and the resistors, capacitors and other passives placed on it.

  • The 5V pin is left unconnected on 7 of 7 designs.
  • The A31_SWDIO pin is left unconnected on 6 of 6 designs.
  • The A30_SWCLK pin is left unconnected on 6 of 6 designs.
  • The NFC1/0.09_H pin is left unconnected on 3 of 3 designs.
GNDpin 13, 18, 20Connected to: GND 74% · not connected 21%
5Vpin 14Connected to: Not connected 100%
A31_SWDIOpin 15Connected to: Not connected 100%
A30_SWCLKpin 16Connected to: Not connected 100%
NFC1/0.09_Hpin 21Connected to: Not connected 100%
NFC2/0.10_Hpin 22Connected to: Not connected 100%

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TOTEM by GEIGEIGEIST, Pcb by zzeneg, DOOOPE by JQ-C and Snak 30 flatfoot by JackMatanky.

The xiao-ble in open source designs

The gallery holds 15 open source boards using the xiao-ble from 7 GitHub repositories; a typical one measures about 160.4 × 104 mm and carries around 57 components.

100% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.

The most starred is TOTEM by GEIGEIGEIST.

Parts used alongside the xiao-ble

Microcontrollers on boards using the xiao-ble

xiao-ble: common questions

Where can I find a xiao-ble reference design?

Each of the 15 boards on this page is a real design using the xiao-ble. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the xiao-ble 5V pin connected?

The 5V pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the xiao-ble.

How is the xiao-ble A31_SWDIO pin connected?

The A31_SWDIO pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the xiao-ble.

How is the xiao-ble A30_SWCLK pin connected?

The A30_SWCLK pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the xiao-ble.

Which microcontrollers do boards using the xiao-ble use?

Most are built on Nordic nRF (15).

How big is a typical board using the xiao-ble?

The median is 160.4 × 104 mm, and 100% are two-layer designs.

What is the most popular open source board using the xiao-ble?

By GitHub stars, TOTEM by GEIGEIGEIST, with 2,042 stars.

Can I simulate one of these boards using the xiao-ble before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part