7 open source boards using the XIAO nRF52840
Real designs built with the XIAO nRF52840, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Pcb
ergonautkb
136 × 91.7 mm53 parts2LCERN-OHL-P-2.0206Nordic nRF
Cweep
cjshearer
108 × 94.7 mm53 parts2LMIT12One s
ergonautkb
117 × 96 mm47 parts2LCERN-OHL-P-2.010Nordic nRF
Dodo keyboard
gorbit99
161.9 × 120.5 mm112 parts2LNo license9Nordic nRF
Seeed Studio XIAO nRF52840 v1.1
kzoropoulos
21 × 17.8 mm70 parts4LNo license1Nordic nRF
Meridian-W104
charancs926-png
458.2 × 164 mm250 parts4LNo license0Nordic nRF
PCB-Business-Card
rganlath3
85.6 × 54 mm14 parts2LCERN-OHL-S-2.00
How designs wire the XIAO nRF52840
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the XIAO nRF52840 connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3 pin is tied to 3.3V on 6 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 12 | Connected to: 3.3V 86% | — |
| GNDpin 13 | Connected to: GND 86% | — |
15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pcb by ergonautkb, Cweep by cjshearer, One s by ergonautkb and Dodo keyboard by gorbit99.
The XIAO nRF52840 in open source designs
The gallery holds 7 open source boards using the XIAO nRF52840 from 7 GitHub repositories; a typical one measures about 117 × 94.7 mm and carries around 53 components.
71% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.
The most starred is Pcb by ergonautkb.
Microcontrollers on boards using the XIAO nRF52840
What boards using the XIAO nRF52840 are built for
XIAO nRF52840: common questions
Where can I find a XIAO nRF52840 reference design?
Each of the 7 boards on this page is a real design using the XIAO nRF52840. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the XIAO nRF52840 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the XIAO nRF52840.
Which microcontrollers do boards using the XIAO nRF52840 use?
Most are built on Nordic nRF (5).
How big is a typical board using the XIAO nRF52840?
The median is 117 × 94.7 mm, and 71% are two-layer designs.
What is the most popular open source board using the XIAO nRF52840?
By GitHub stars, Pcb by ergonautkb, with 206 stars.
Can I simulate one of these boards using the XIAO nRF52840 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.