11 open source boards using the Z84C00XXP
Real designs built with the Z84C00XXP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Kraft80 REV2.2
ARMCoderBR
150.6 × 171.7 mm150 parts2LGPL-2.05Z80-computer v0
vaibhavvahbiav
133.8 × 140.8 mm47 parts10LMIT0Z80board
rcapaverde
182.3 × 90.2 mm33 parts2LNo license0AlphaPlus
ARMCoderBR
150.6 × 110.4 mm78 parts2LGPL-2.05FPGA
Zx50 Cpu RevC4
mmosko
133.5 × 100.3 mm85 parts6LNo license0MECB Z80 CPU
epaell
99.8 × 99.8 mm23 parts2LNo license6Zx50 Clock Mezzanine RevB
mmosko
50.2 × 69.8 mm38 parts4LNo license0Zx50 Clock Mezzanine RevC
mmosko
50.2 × 69.8 mm38 parts4LNo license0Zx50 Cpu RevB1
mmosko
133.5 × 100.3 mm38 parts4LNo license0Zx50 FrontPanelDisplay
mmosko
152.4 × 114.3 mm37 parts2LNo license0RP2040/RP2350
Zx50 FrontPanelCard
mmosko
133.5 × 68.8 mm22 parts4LNo license0
How designs wire the Z84C00XXP
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the Z84C00XXP connects to, and the resistors, capacitors and other passives placed on it.
- The CLK pin has a crystal on 3 of 4 designs, most often 8 MHz.
- The RESET pin has a pull-up to 5V on 3 of 4 designs, most often 4.7 kΩ (then 10 kΩ).
- The BUSACK pin is left unconnected on 3 of 4 designs.
- The RFSH pin is left unconnected on 3 of 4 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CLKpin 6 | Connected to: Signal 100% |
|
| VCCpin 11 | Connected to: 5V 100% |
|
| INTpin 16 | Connected to: Signal 75% · 5V 25% |
|
| NMIpin 17 | Connected to: 5V 50% · a signal 50% |
|
| BUSACKpin 23 | Connected to: Not connected 75% · a signal 25% | — |
| WAITpin 24 | Connected to: 5V 50% · a signal 50% |
|
| BUSREQpin 25 | Connected to: 5V 50% · a signal 50% |
|
| RESETpin 26 | Connected to: Signal 100% |
|
| RFSHpin 28 | Connected to: Not connected 75% · a signal 25% | — |
| GNDpin 29 | Connected to: GND 100% | — |
30 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MECB Z80 CPU by epaell, AlphaPlus by ARMCoderBR, Zx50 Clock Mezzanine RevB by mmosko and Z80board by rcapaverde.
The Z84C00XXP in open source designs
The gallery holds 11 open source boards using the Z84C00XXP from 5 GitHub repositories; a typical one measures about 133.5 × 100.3 mm and carries around 38 components.
55% use four copper layers or more, and 27% carry an open source license.
The most starred is MECB Z80 CPU by epaell.
Parts used alongside the Z84C00XXP
Microcontrollers on boards using the Z84C00XXP
What boards using the Z84C00XXP are built for
Z84C00XXP: common questions
Where can I find a Z84C00XXP reference design?
Each of the 11 boards on this page is a real design using the Z84C00XXP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the Z84C00XXP CLK pin connected?
The CLK pin has a crystal on 3 of 4 designs, most often 8 MHz. Counted from the KiCad layouts of 5 open source designs using the Z84C00XXP.
What pull-up resistor is used on the Z84C00XXP RESET pin?
The RESET pin has a pull-up to 5V on 3 of 4 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the Z84C00XXP.
How is the Z84C00XXP BUSACK pin connected?
The BUSACK pin is left unconnected on 3 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the Z84C00XXP.
What parts are used alongside the Z84C00XXP?
The 74HC138, HM62256BLP and KM28C64A appear in the most repositories here.
Which microcontrollers do boards using the Z84C00XXP use?
Most are built on FPGA (1) and RP2040/RP2350 (1).
How big is a typical board using the Z84C00XXP?
The median is 133.5 × 100.3 mm, and 45% are two-layer designs.
What is the most popular open source board using the Z84C00XXP?
By GitHub stars, MECB Z80 CPU by epaell, with 6 stars.
Can I simulate one of these boards using the Z84C00XXP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.