5 open source boards using the AP22653W6-7
Real designs built with the AP22653W6-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PDNode Baseboard
DvidMakesThings
203 × 151.8 mm208 parts6LAGPL-3.082
ESP32Endeavour2
petrmikheev
100 × 85 mm263 parts6LGPL-3.049
Raspberry PiUnifying
balthazar-space
120.9 × 78.8 mm121 parts4LCERN-OHL-S-2.07
Giris
dubnubdubnub
70.1 × 60 mm136 parts4LApache-2.00
ESP32Endeavour2 upd
100 × 85 mm238 parts6LGPL-3.049
The AP22653W6-7 in open source designs
The gallery holds 5 open source boards using the AP22653W6-7 from 4 GitHub repositories; a typical one measures about 100 × 85 mm and carries around 208 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is PDNode Baseboard by DvidMakesThings.
Microcontrollers on boards using the AP22653W6-7
What boards using the AP22653W6-7 are built for
AP22653W6-7: common questions
Where can I find a AP22653W6-7 reference design?
Each of the 5 boards on this page is a real design using the AP22653W6-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP22653W6-7 use?
Most are built on ESP32 (2) and Raspberry Pi (1).
How big is a typical board using the AP22653W6-7?
The median is 100 × 85 mm, and 0% are two-layer designs.
What is the most popular open source board using the AP22653W6-7?
By GitHub stars, PDNode Baseboard by DvidMakesThings, with 82 stars.
Can I simulate one of these boards using the AP22653W6-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.