10 open source boards using the AP63203WU
Real designs built with the AP63203WU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Cheetah-MX4-Mini
KaiPereira
81.6 × 88.8 mm165 parts4LCERN-OHL-P-2.0180
AVR/ArduinoSparkAltBatteryBoard
fahreddinaykut
58.8 × 29 mm37 parts4LMIT18
ESP32Esp32-s3 single motor & battery controller
techy-robot
44.9 × 42 mm101 parts4LCERN-OHL-S-2.012
RP2040/RP2350Pico2-test mule
mikesmitty
52.5 × 42 mm68 parts2LCERN-OHL-P-2.011
ESP32Paperflux
albanpetit
33.5 × 50 mm43 parts4LNo license10
ESP32ESP32 Breakouts Playground
PockyBum522
203.1 × 108.1 mm116 parts2LMIT2
STM32DAQ-V4.1
IlyaasAitSimmou
38 × 100 mm76 parts4LNo license1
STM32BallBalncer
MarcelKleiner
64.5 × 77 mm98 parts2LNo license0
STM32Hackydrone
0xmanidev
51.4 × 51.4 mm64 parts2LMIT0
RP2040/RP2350Rp2350-decoder
19.9 × 8.8 mm67 parts6LCERN-OHL-P-2.011
The AP63203WU in open source designs
The gallery holds 10 open source boards using the AP63203WU from 9 GitHub repositories; a typical one measures about 51.9 × 50.7 mm and carries around 72 components.
60% use four copper layers or more, and 70% carry an open source license.
The most starred is Cheetah-MX4-Mini by KaiPereira.
Parts used alongside the AP63203WU
Microcontrollers on boards using the AP63203WU
What boards using the AP63203WU are built for
AP63203WU: common questions
Where can I find a AP63203WU reference design?
Each of the 10 boards on this page is a real design using the AP63203WU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP63203WU use?
Most are built on STM32 (4), ESP32 (3), RP2040/RP2350 (2) and AVR/Arduino (1).
How big is a typical board using the AP63203WU?
The median is 51.9 × 50.7 mm, and 40% are two-layer designs.
What is the most popular open source board using the AP63203WU?
By GitHub stars, Cheetah-MX4-Mini by KaiPereira, with 180 stars.
Can I simulate one of these boards using the AP63203WU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.