10 open source boards using the AP63205WU
Real designs built with the AP63205WU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Transponder-12.0.1
peterantypas
90.4 × 25 mm115 parts4LGPL-3.0444
ESP32QPocketPCR Main
GaudiLabs
82.5 × 140 mm96 parts2LGPL-3.021
BaSHi-SM-1
kiu
48 × 23 mm22 parts2LCC-BY-NC-4.013
ESP32Security-Alarm-Panel
Matyas604
100 × 73.9 mm113 parts2LGPL-3.01
ESP32WellD
kinggh0stee
100 × 55 mm99 parts2LMIT1
AVR/ArduinoEngine monitor
alexanderenrique
50.8 × 38.1 mm60 parts2LNo license0
STM32Stm32-flight controller
bachaaymene
59 × 59 mm58 parts4LNo license0
ESP32QCamPCR
82.5 × 140 mm95 parts2LGPL-3.021
BaSHi-ZERO-1
48 × 23 mm22 parts2LCC-BY-NC-4.013
Usbpd adapter
fachat
61.3 × 45.5 mm49 parts2LNo license4
The AP63205WU in open source designs
The gallery holds 10 open source boards using the AP63205WU from 8 GitHub repositories; a typical one measures about 71.9 × 50.3 mm and carries around 78 components.
80% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Transponder-12.0.1 by peterantypas.
Parts used alongside the AP63205WU
Microcontrollers on boards using the AP63205WU
What boards using the AP63205WU are built for
AP63205WU: common questions
Where can I find a AP63205WU reference design?
Each of the 10 boards on this page is a real design using the AP63205WU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP63205WU use?
Most are built on ESP32 (4), STM32 (2) and AVR/Arduino (1).
How big is a typical board using the AP63205WU?
The median is 71.9 × 50.3 mm, and 80% are two-layer designs.
What is the most popular open source board using the AP63205WU?
By GitHub stars, Transponder-12.0.1 by peterantypas, with 444 stars.
Can I simulate one of these boards using the AP63205WU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.