9 open source boards using the Arduino Nano V3
Real designs built with the Arduino Nano V3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoSdbox
jbilander
55 × 59 mm18 parts2LGPL-3.0108
AVR/ArduinoWii-BVM-Card
Shank-Mods
105 × 160 mm106 parts2LNo license26
AVR/ArduinoBiasPro
ToneAlchemy
33.9 × 90 mm18 parts2LMIT16
AVR/ArduinoBkm-129x scart vga
skumlos
105 × 160 mm67 parts2LNo license15
AVR/Arduino6ch sound processor
dilshan
59 × 60 mm69 parts2LMIT12
AVR/ArduinoSDR Reciever
greenjacketgirl
94.9 × 72.8 mm120 parts2LNo license8- schematic only · 14 partsAVR/Arduino
Triggy
Broosky
14 partsNo license2 - schematic only · 23 partsAVR/Arduino
Breezy
23 partsNo license1 - schematic only · 5 partsAVR/Arduino
Pixy
5 partsNo license1
The Arduino Nano V3 in open source designs
The gallery holds 9 open source boards using the Arduino Nano V3 from 9 GitHub repositories; a typical one measures about 76.9 × 81.4 mm and carries around 23 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Sdbox by jbilander.
Parts used alongside the Arduino Nano V3
Microcontrollers on boards using the Arduino Nano V3
What boards using the Arduino Nano V3 are built for
Arduino Nano V3: common questions
Where can I find a Arduino Nano V3 reference design?
Each of the 9 boards on this page is a real design using the Arduino Nano V3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the Arduino Nano V3?
The 74LVC125, ADG1611 and THS7374 appear in the most repositories here.
Which microcontrollers do boards using the Arduino Nano V3 use?
Most are built on AVR/Arduino (9).
How big is a typical board using the Arduino Nano V3?
The median is 76.9 × 81.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the Arduino Nano V3?
By GitHub stars, Sdbox by jbilander, with 108 stars.
Can I simulate one of these boards using the Arduino Nano V3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.